How to Fix Galaxy S10 “Moisture detected” Error: Tips for Removing Moisture in Charging Port

post-thumb

Fix Galaxy S10 “Moisture detected” error | Moisture in Charging Port

One of the common issues Samsung Galaxy S10 users encounter is the “moisture detected” error. This error message appears when the phone’s charging port detects moisture, preventing the device from charging. While it’s a useful feature to protect the phone from possible water damage, it can be frustrating when the error message appears even when the charging port is not wet.

If you’re facing this issue and want to fix it, there are several tips you can try to remove moisture from the charging port. First, make sure you don’t plug in the charger while the port is still wet. Use a soft cloth or cotton swab to gently clean the port and remove any moisture or debris. You can also try blowing into the port or using a hairdryer on a low setting to dry it out.

Table Of Contents

If these methods don’t work, you can try restarting your phone or performing a soft reset. This can sometimes help reset the charging port and clear any temporary issues. Additionally, you can put your phone in a bag of uncooked rice or use silica gel packets to absorb any remaining moisture. Leave the phone in the rice or with the silica gel packets overnight to ensure thorough drying.

If none of these tips work and the “moisture detected” error still persists, it may be a hardware issue. In this case, it’s best to contact Samsung support or visit a certified technician to get your phone examined and repaired. They will be able to identify any underlying hardware problems and provide a proper solution.

Overall, dealing with the “moisture detected” error on your Galaxy S10 can be frustrating, but with these tips, you can try to remove moisture from the charging port and get your phone back to normal charging functionality. Just remember to be careful when dealing with the charging port and always ensure it is dry before plugging in the charger.

How to Fix Galaxy S10 “Moisture detected” Error: Tips for Removing Moisture in Charging Port

If you own a Samsung Galaxy S10 and are experiencing a “Moisture detected” error when trying to charge your device, it can be frustrating. This error message appears when the charging port detects moisture or water, which can prevent the device from charging properly. However, there are several tips you can follow to remove moisture from the charging port and fix this error.

Here are some methods you can try:

1. Restart your device

  1. Press and hold the power button on your Galaxy S10.
  2. Tap “Restart” when the power menu appears.
  3. Wait for your device to reboot and try charging it again.

2. Check for visible moisture

Read Also: How to install games on Xbox One when the console is turned off: detailed instructions

Inspect the charging port of your Galaxy S10 for any visible moisture or water. If you see any, gently wipe it away using a soft cloth or tissue. Be careful not to push the moisture further into the port.

3. Use a hairdryer

  1. Set your hairdryer to the lowest heat setting.
  2. Hold the hairdryer a few inches away from the charging port.
  3. Gently blow air into the port for a few minutes, moving the hairdryer around to cover the entire port.
  4. Check if the moisture detected error is resolved.

4. Use uncooked rice

  1. Get a container or a bag that can fit your Galaxy S10.
  2. Place uncooked rice at the bottom of the container or bag.
  3. Put your Galaxy S10 on top of the rice, ensuring the charging port is fully submerged.
  4. Leave your device in the rice for at least 24 hours.
  5. Afterward, remove your Galaxy S10 from the rice and check if the moisture detected error is gone.

5. Contact Samsung or a professional

Read Also: How To Fix Xbox One Party Chat Won’t Switch Issue | NEW in 2023!

If none of the above methods work, it is recommended to contact Samsung or a professional technician for assistance. They may be able to help you further troubleshoot the issue or provide a repair solution.

Remember, it is important to keep your device dry and avoid exposing it to water or moisture to prevent future charging port issues.

Step-by-Step Guide to Fix Galaxy S10 “Moisture detected” Error:

If you’re facing the “Moisture detected” error on your Galaxy S10, here’s a step-by-step guide to help you fix the issue:

  1. Disconnect any charging cables or accessories: Start by disconnecting any charging cables or accessories from your Galaxy S10. This includes both wired and wireless charging options.
  2. Check the charging port: Look closely at the charging port on your phone to ensure there is no lint, debris, or moisture present. If you see anything, gently clean the port using a soft brush or toothpick.
  3. Restart your phone: Sometimes a simple restart can fix minor software glitches. Hold down the power button and select “Restart” from the menu that appears.
  4. Enable Airplane mode: Swipe down from the top of the screen to access the quick settings and enable Airplane mode. This will temporarily disable all wireless connections on your phone.
  5. Plug in the charger: After enabling Airplane mode, plug in the charger to see if the “Moisture detected” error still appears. If not, you can try charging your phone in this mode.
  6. Use a different charger and cable: If the error persists, try using a different charger and cable to rule out any issues with your current setup.
  7. Let it dry: If you recently exposed your phone to moisture, such as rain or water splashes, it’s possible that there is actual moisture inside the charging port. In this case, leave your phone in a dry environment for a few hours or use a hairdryer on low heat to gently dry the port.
  8. Update your software: Keeping your phone’s software up to date is important for both performance and bug fixes. Go to Settings > Software update and check for any available updates.
  9. Reset your phone: If all else fails, you can try resetting your phone to factory settings. Make sure to backup your data before doing this as it will erase everything on your device.

If none of these steps fix the “Moisture detected” error on your Galaxy S10, it may be a hardware issue. In this case, it’s recommended to contact Samsung customer support or bring your phone to an authorized service center for further assistance.

Tips for Removing Moisture in Charging Port:

  • Power off your Galaxy S10 as soon as you see the “Moisture detected” error message to prevent any potential damage to the device.
  • Do not try to charge your device until the moisture is completely gone from the charging port. Attempting to charge your device while it is still wet may cause short circuits or other electrical problems.
  • Use a soft, lint-free cloth or cotton swab to gently clean the charging port. Be careful not to push any moisture further into the port.
  • If the moisture is stubborn and cannot be easily wiped away, you can use a can of compressed air to blow it out. Hold the can upright and use short bursts of air to avoid damaging the port.
  • Another method to remove moisture is to use a vacuum cleaner on the lowest setting. Hold the nozzle near the charging port and let the suction pull out the moisture.
  • Some users have found success in using a hairdryer on the lowest heat setting to gently dry out the moisture in the charging port. Keep the hairdryer at least a few inches away from the port and continuously move it around to avoid overheating.
  • If none of the above methods work, you can try placing the device in a bag of uncooked rice or silica gel packets to absorb the moisture. Leave it in the bag for at least 24 hours.
  • After attempting to remove the moisture, wait for the charging port to completely dry before attempting to charge your device again.

Additional Measures to Prevent Moisture Build-up in Charging Port:

  • Keep your device away from water, especially when you are charging it.
  • Avoid using your device in humid environments or areas with high moisture levels.
  • Do not expose your device to extreme temperatures, such as leaving it in a hot car or in direct sunlight.
  • Ensure that the charging port cover is securely closed when not in use.
  • Regularly clean the charging port with a soft cloth or brush to remove any dust or debris that may have accumulated.
  • Avoid using third-party chargers or cables that may not be compatible with your device, as they may not provide proper insulation against moisture.
  • If you frequently encounter moisture detection errors, consider using wireless charging as an alternative method to charge your device.
  • If your device does get wet, immediately disconnect the charger and allow it to dry thoroughly before attempting to charge again.

Following these additional measures can help prevent moisture build-up in the charging port of your Galaxy S10 and reduce the likelihood of encountering the “Moisture detected” error.

FAQ:

Can I use a hairdryer or other heating devices to remove the moisture from my Galaxy S10’s charging port?

No, it is not recommended to use a hairdryer or any other heating device to remove moisture from your Galaxy S10’s charging port. High heat can potentially damage the internal components of your phone. It’s best to follow the recommended methods of gently cleaning and drying the charging port using a soft cloth or towel, and allowing it to air dry in a well-ventilated area.

How long does it usually take for the “Moisture detected” error to disappear after water exposure?

The time it takes for the “Moisture detected” error to disappear after water exposure can vary depending on the severity of the moisture and the environmental conditions. It is generally recommended to leave your Galaxy S10 in a dry and well-ventilated area for at least 24 hours. However, it’s important to note that in some cases, it may take longer for the error to disappear or it may require professional assistance.

What does the “Moisture detected” error mean on Galaxy S10?

The “Moisture detected” error on Galaxy S10 means that the device’s charging port has detected moisture or liquid, which prevents charging for safety reasons.

See Also:

comments powered by Disqus

You May Also Like