How to apply an update from adb sideload (Windows/Mac) - detailed instructions

How to apply an update from adb sideload (windows mac).

Updating the operating system on your device doesn’t always go smoothly, and sometimes you have to look for alternative ways to update. One such method is adb sideload. This method allows you to download and install the update on your Android device using the command line on your Windows or Mac operating system.

Table Of Contents

Beforehand, you need to make sure that the device is connected to your computer and debug mode is enabled on it. Then you need to install adb (Android Debug Bridge), which allows communication between the computer and the device. The adb program is available for download from the official Android Developers website.

After installing adb, you need to open a command prompt (Windows) or terminal (Mac). Then navigate to the folder where adb was installed. If necessary, you can add the path to adb to the operating system environment variables. You can then proceed to apply the update.

To apply the update from adb sideload, you must first go into recovery mode on your Android device. This can be done by pressing a button combination that depends on the device model. In recovery mode, you need to select “Apply update from ADB” or similar. After that, you need to execute the command “adb sideload “. Here is the name of the update file.

New update from adb sideload: easy installation on Windows/Mac

ADB sideload is a powerful tool used to install updates on Android devices via computer in recovery mode. It allows you to flash your devices without using any third-party programs or custom recavers. In this article, we will see how to easily install a new update using adb sideload on Windows or Mac computers.

To install an update from adb sideload, you will need:

An Android device connected to your computer with a USB cable;
Installed drivers for your Android device;
ADB tools, which can be installed separately or included in the Android SDK.

Here are the step-by-step instructions to install the update from adb sideload:

Step 1: Enable recovery mode on your Android device

Turn off your device.
Then press and hold a key combination to enter recovery mode. It can be a key combination such as “Volume Down + Power On”, “Volume Up + Power On” or another key combination depending on your device.
When you see your device logo and it says Recovery Mode, release all the keys.

Step 2: Connect your Android device to your computer

Connect your Android device to your computer using a USB cable.

Step 3: Install ADB Tools

If you have already installed the Android SDK that includes the ADB tools, you can proceed to the next step. If not, you can download the ADB-tools archive separately and unzip it on your computer.

Step 4: Open a command prompt (terminal)

For Windows users:

Press the Win+R key to open the Run window.
Type “cmd” and press the Enter key.

For Mac users:

Press Command+Space to open Spotlight.
Type “terminal” and select it from the search results list.

Step 5: Enter the command to install the update from adb sideload

At the command prompt (terminal), enter the following command:


adb sideload path_to_file.zip

Instead of path_to_file.zip, specify the path to the Android update file on your computer.

Step 6: Wait for the installation process to complete

ADB sideload will start the process of installing the update on your Android device. The process may take some time, so stay patient and do not turn off or unplug your device during the installation.

Once the installation process is complete, your device will reboot and start with the new update.

Now you know how easy it is to install a new update using adb sideload on Windows or Mac computers. Be careful and follow the given instructions to avoid errors and problems during the installation.

Preparing to install the update

Before you begin installing the update via adb sideload, you will need the following materials and skills:

Read Also: The importance of the chair to the ergonomics of the gaming chair

A Windows or Mac computer;
A USB cable to connect your device to your computer;
An installed and configured “Android Debug Bridge (ADB)” platform;
Downloaded operating system update file in .zip format;
Knowledge of basic adb commands such as installing drivers, connecting the device in debug mode, and executing commands.

If you have trouble setting up ADB or downloading update files, you can find the appropriate instructions on your device manufacturer’s website or on the Internet.

Once you have everything you need, you can move on to the next step - installing the update via adb sideload.

The process of installing the update on Windows

Updating your device using adb sideload is available for both Windows and Mac operating system. In this article, let’s go through the process of installing the update on Windows.

Step 1: Install Android Debug Bridge (ADB) on your computer. ADB is a developer tool that allows you to communicate with Android devices via USB connection. You can download ADB from the official Android Developers website.

Step 2: Enable developer mode on your Android device. To do this, open “Settings” and find the “About phone” or “About tablet” section. Then tap on the “Build Number” multiple times to activate developer mode.

Step 3: Go back to “Settings” and open “Developer Mode”. Enable the “USB Debugging” option. When you connect the device to your computer with a USB cable, you will see a dialog box asking you to allow debugging on the device. Allow debugging.

Read Also: PS4 CE-30774-1 Error: How to Fix the Problem [NEW & Updated 2023]

Step 4: Connect your Android device to the computer using the USB cable. Make sure your device is properly connected and detected by your computer.

Step 5: Open a command prompt on your computer. To do this, press the Windows key + R, type “cmd” and press Enter.

Step 6: At the command prompt, navigate to the folder where you have ADB installed. Type the command “cd C:C:path to ADB folder”, replacing “path to ADB folder” with the actual path to the ADB folder.

Step 7: Check if your computer recognizes the Android device. Type the command “adb devices”. If the device is successfully recognized, you will see its device ID in the list.

Step 8: Download the update for your Android device to your computer. Usually, updates are provided as ZIP files. Save the ZIP file to your ADB folder.

Step 9: At the command prompt, type the command “adb sideload filename_file.zip”, replacing “filename_file.zip” with the actual name of the update.

Step 10: Wait for the update installation process to complete. During this process, the Android device screen will display information about the installation process.

Step 11: Once the update installation is complete, you will see a success message in the command prompt.

Now you know how to install an update on your Android device using adb sideload on Windows PC. This process allows you to update your device without using special developer tools or modifying system files.

Mac update installation process

If you want to install the update on your device using adb sideload on a Mac, follow these simple steps:

Enable USB debugging on your Android device. To do this, go to Settings > Advanced Settings > Developers and enable USB Debugging.
Download and install Android Debug Bridge (adb) on your Mac. You can find the installation file on the official Android developer website.
Connect your Android device to your Mac with a USB cable.
Launch Terminal on your Mac computer. You can find it in the Utilities folder.
In Terminal, type the following command: adb devices. It will allow you to check if your Android device is connected to your computer.
If your device is successfully connected, you will see its serial number in the device list.
Download the update to your Mac computer. Make sure the update file has a .zip extension.
Copy the update file to the folder where adb is installed on your Mac.
In a terminal, navigate to the folder where adb is located. You can use the cd command to do this.
In a terminal, type the following command: adb sideload filename_file.zip, replacing “filename_file.zip” with the name of the update file.
This will begin the process of installing the update on your device. Wait for it to complete.
Once the update installation is complete, your device will reboot and update.

Now you know how to install the update on your device using adb sideload on Mac.

FAQ:

What hardware tool is required to apply the adb sideload update?

To apply the adb sideload update, you will need a computer (Windows or Mac) that has the drivers for your device installed and a USB cable to connect your device to your computer.

What is adb sideload and why use it?

adb sideload is an Android Debug Bridge (adb) command line feature that allows you to install a software update on your device without downloading it via recovery mode or OTA update. This is useful when your device won’t boot or you want to install an update from your computer.

How do I install adb and configure it on my computer?

To install adb on computer, you need to download Android SDK Platform-tools from the official Android developers website. Once installed, you need to add the path to the SDK Platform-tools directory to your PATH environment variable. This will allow you to run adb from any command line directory.

How do I connect my device to my computer in ADB mode?

To connect your device to your computer in ADB mode, you need to enable developer mode on your device, activate USB debugging and connect your device to your computer. When connecting the device for the first time, you may need to enable debugging on the device.

How do I use adb sideload to install an update?

To use adb sideload to install the update, you must first be in recovery mode on your device. Connect your device to your computer and open a command prompt. Then run the “adb devices” command to make sure your device is detected. Then run the command “adb sideload " where is the path to the update file you want to install.

How do I use adb sideload to update on a Windows computer?

To use adb sideload to update on Windows computer, you need to install Android SDK and device drivers first, then connect the device to your computer via USB cable, open a command prompt and enter the following command: adb sideload . After that, the update will be installed on the device.