Simple Ways to Fix Bose Soundlink Color Battery Will Not Charge Problem

post-thumb

How To Fix Bose Soundlink Color Battery Will Not Charge Problem

If you own a Bose Soundlink Color speaker and are experiencing issues with the battery not charging, you are not alone. Many users have reported this problem, but the good news is that there are several simple solutions you can try to fix it.

Table Of Contents

1. Check the power source

The first thing you should do is check the power source. Ensure that the power outlet you are using is working by plugging in another device. If the outlet is functional, try using a different charging cable and adapter to rule out any problems with them.

2. Clean the charging port

Sometimes, dust or debris may accumulate in the charging port, preventing proper contact and charging. Use a small, soft brush or compressed air to gently clean the port. Be careful not to damage the port or push the debris further inside.

3. Reset your speaker

Resetting your Bose Soundlink Color speaker can often resolve charging issues. To do this, press and hold the Power button for 10 seconds until the speaker turns off. Then, turn it back on and try charging again.

4. Update the firmware

In some cases, outdated firmware can cause charging problems. Visit the Bose website and check if there are any firmware updates available for your speaker. Follow the instructions provided to update the firmware and see if it resolves the battery charging issue.

By following these simple steps, you should be able to fix the battery not charging problem on your Bose Soundlink Color speaker. If the issue persists, it may be a hardware problem, and you should contact Bose customer support for further assistance.

If you are experiencing issues with charging the battery of your Bose Soundlink Color speaker, there are several simple tips you can try to resolve the problem.

Read Also: How To Fix The LG V40 ThinQ Mobile Network Not Available Issue - Ultimate Guide
  1. Check the power source: Ensure that the charging cable is securely plugged into a working power source. Try using a different outlet or USB port to see if the issue persists.
  2. Clean the charging port: Dust, debris, or lint can accumulate in the charging port, preventing proper connection. Gently clean the charging port using a soft, dry cloth to remove any obstructions.
  3. Inspect the charging cable: Examine the charging cable for any signs of damage, such as frayed wires or bent connectors. If the cable is damaged, consider replacing it with a new one from a reputable source.
  4. Reset the speaker: Try resetting the Soundlink Color speaker by pressing and holding the Power button for ten seconds until the device turns off. Then, turn it back on and check if the battery charging issue is resolved.
  5. Update the firmware: Ensure that your Soundlink Color speaker is running the latest firmware version. Visit the official Bose website and download any available firmware updates for your speaker model.
  6. Contact Bose customer support: If none of the above tips resolve the battery charging issue, it is recommended to get in touch with Bose customer support. They can provide further assistance or guide you through any necessary repairs or replacements.

By following these simple tips, you can hopefully resolve the battery charging issues with your Bose Soundlink Color speaker and enjoy uninterrupted music playback.

Check Battery Connections

One of the possible causes for a Bose Soundlink Color not charging issue is poor battery connections. The battery might not be properly connected, or there may be dirt or debris blocking the connections. Here’s what you can do to check and fix the battery connections:

  1. Disconnect the charger: Before checking the battery connections, make sure to unplug the charger from both the device and the power source. This ensures your safety and prevents any potential damage.
  2. Remove the battery: Most Soundlink Color models have a removable battery. Carefully remove the battery from the device using the provided instructions. Make sure to handle the battery with care, as it is a delicate component.
  3. Inspect the battery contacts: Check the battery contacts for any signs of dirt, corrosion, or damage. If you notice any grime or buildup, you can use a soft, dry cloth to gently clean the contacts. Avoid using water or any liquid cleaners, as they can damage the battery.
  4. Check the device’s battery connectors: Examine the battery connectors on the device itself. Make sure there are no bent or damaged pins that may prevent a proper connection. If any pins are bent, you can use a small, non-metallic object (such as a toothpick) to carefully straighten them out.
  5. Reinsert the battery: Once the battery contacts and connectors are clean and undamaged, carefully reinsert the battery into the device. Make sure it is properly aligned and securely seated in its slot.
  6. Reconnect the charger: Plug the charger back into the device and the power source. Check if the battery is now charging. If the charging indicator lights up or the device starts charging, then the issue was likely with the battery connections.

If you have followed these steps and the battery still does not charge, there may be other underlying issues with the device or battery itself. It is recommended to contact Bose customer support or take the device to an authorized service center for further assistance.

Reset the Speaker

If you are experiencing the issue where the Bose Soundlink Color battery will not charge, resetting the speaker may help fix the problem. Follow these steps to perform a reset:

  1. Turn off the speaker by pressing and holding the power button for approximately 10 seconds.
  2. Disconnect the speaker from any power source or USB cable.
  3. Wait for at least 5 minutes to allow the speaker to completely power down.
  4. After 5 minutes, connect the speaker to a power source or USB cable.
  5. Turn on the speaker by pressing the power button.

Performing a reset can help clear any temporary glitches or issues that may be causing the battery not to charge properly. After resetting the speaker, try charging it again and see if the problem is resolved.

Update Firmware and Drivers

If your Bose Soundlink Color battery is not charging, it’s possible that outdated firmware or drivers are causing the issue. Updating the firmware and drivers can sometimes resolve charging problems.

Read Also: The 10 best proxy browsers for Windows and Mac: full review article

To update the firmware and drivers of your Bose Soundlink Color, follow these steps:

  1. Connect your Soundlink Color to your computer using the USB cable provided.
  2. Open the Bose Connect app on your computer.
  3. In the app, navigate to the “Settings” or “Device” section.
  4. Look for any available firmware or driver updates for your Soundlink Color.
  5. If updates are available, click on the “Update” button to start the update process.
  6. Follow the on-screen instructions to complete the firmware or driver update.

Once the update process is complete, disconnect your Soundlink Color from the computer and try charging it again. Hopefully, the issue of the battery not charging will be resolved.

If updating the firmware and drivers does not solve the problem, consider trying the other troubleshooting steps mentioned in this article.

FAQ:

There could be several reasons why your Bose Soundlink Color battery is not charging. It could be a problem with the charging cable or adapter, a faulty battery, or an issue with the charging port on the speaker. To troubleshoot the problem, you can try using a different charging cable and adapter, cleaning the charging port, or resetting the speaker.

If your Bose Soundlink Color speaker is not turning on, it could be due to a low battery, a faulty power button, or a software issue. First, make sure the speaker is charged by connecting it to a power source. If the battery is not the issue, try resetting the speaker by holding down the power button for 10 seconds. If none of these steps work, it may be necessary to contact Bose customer service for further assistance or consider getting the speaker repaired.

To clean the charging port on your Bose Soundlink Color speaker, you can use a soft, dry toothbrush or a can of compressed air. Gently brush or blow away any dust or debris that may be obstructing the charging port. Be careful not to use any liquid cleaners or insert any objects into the port, as this could damage the speaker.

No, it is not possible to replace the battery in a Bose Soundlink Color speaker. The battery is integrated into the device and cannot be easily replaced by the user. If you are experiencing battery issues with your speaker, it may be necessary to contact Bose customer service for further assistance or consider getting the speaker repaired.

The charging time for the battery on a Bose Soundlink Color speaker can vary depending on the power source and the remaining battery life. On average, it takes approximately 3 to 4 hours to fully charge the battery. It is recommended to use the provided charging cable and adapter for optimal charging performance.

If your Bose Soundlink Color battery is not charging, it could be due to a few reasons. Firstly, make sure that the charging cable is securely plugged into both the speaker and the power source. If it is plugged in correctly, try using a different power source, such as a different wall outlet or a different USB port on your computer. Sometimes, the issue could be with the charging cable itself, so try using a different cable if possible. Additionally, check if there are any debris or dirt in the charging port of the speaker, as this could also prevent it from charging. If you have tried all these steps and the battery still doesn’t charge, it may be a sign of a larger battery issue and you may need to contact Bose customer support for further assistance.

The time it takes for the Bose Soundlink Color battery to fully charge can vary depending on the current battery level and the charging method used. On average, it takes about 3 hours to fully charge the battery when using the provided wall charger. However, if you are charging the speaker through a computer or a portable charger, it may take slightly longer. To ensure the battery is fully charged, it is recommended to leave the speaker connected to the power source for at least 3-4 hours, or until the battery indicator on the speaker shows that it is fully charged.

See Also:

    comments powered by Disqus

    You May Also Like