How to Troubleshoot a Samsung Galaxy Tab S4 that Won't Power On

How to fix Samsung Galaxy Tab S4 that won’t turn on?

Are you having trouble turning on your Samsung Galaxy Tab S4? Don’t panic! There are several troubleshooting steps you can try to resolve this issue and get your tablet up and running again.

Table Of Contents

First, double-check that the battery is charged. Connect your tablet to a power source using the original charger and cable, and let it charge for at least 15 minutes. Sometimes, a completely drained battery can prevent the device from powering on.

If the battery is indeed charged, but the tablet still won’t turn on, try a soft reset. This can help reset any temporary software glitches that may be causing the issue. To perform a soft reset, press and hold the power button and the volume down button simultaneously for about 10 seconds. Release the buttons when the Samsung logo appears on the screen.

If the soft reset didn’t work, try booting the tablet into safe mode. Safe mode allows the device to start with only the essential system apps and settings, which can help diagnose if a third-party app is causing the problem. To enter safe mode, press and hold the power button until the power options menu appears. Then, press and hold the “Power off” option until the “Restart in Safe Mode” prompt appears. Tap “OK” to confirm and wait for the device to boot into safe mode.

If the tablet powers on in safe mode, then a third-party app is likely to blame. You can try uninstalling recently installed apps or perform a factory reset to eliminate any software conflicts. However, if the tablet still won’t power on even in safe mode, it may be necessary to contact Samsung support or visit a professional technician for further assistance.

How to troubleshoot a Samsung Galaxy Tab S4 that won’t power on

Having a Samsung Galaxy Tab S4 that won’t power on can be frustrating, but there are several troubleshooting steps you can try to get it working again. Here are some possible solutions:

Check the charging cable and adapter: Ensure that the charging cable and adapter are not damaged or faulty. Try using a different cable and adapter to see if that solves the issue.
Inspect the charging port: Examine the charging port on your tablet for any dirt, debris, or damage. Use a can of compressed air to clean out any dust or debris that may be blocking the connection.
Perform a forced restart: Press and hold the power button and volume down button simultaneously for about 10-15 seconds. This should force restart the tablet and may resolve the power issue.
Check the battery: It’s possible that the battery has drained completely. Plug in the tablet and allow it to charge for at least 30 minutes before attempting to power it on again.
Try a factory reset: If the above steps haven’t worked, you can try performing a factory reset. Keep in mind that this will erase all data on your tablet, so make sure you have a backup. To initiate a factory reset, turn off the tablet, then press and hold the power button and volume up button simultaneously until the Samsung logo appears.
Contact Samsung support: If none of the above steps solve the issue, it may be a hardware problem. Reach out to Samsung support or take your tablet to an authorized service center for further assistance.

By following these troubleshooting steps, you should be able to identify and resolve the issue with your Samsung Galaxy Tab S4 that won’t power on.

Read Also: How To Appear Offline On Animal Crossing - Latest Guide 2023

Possible reasons for a Samsung Galaxy Tab S4 not powering on

1. Battery Drainage: The most common reason for a Samsung Galaxy Tab S4 not powering on is a drained battery. If the tablet has been used extensively or has been left idle for a long time without charging, the battery may be completely discharged. In such cases, it is recommended to connect the tablet to a power source and let it charge for at least 15-20 minutes before attempting to power it on.

2. Faulty Power Button: Another possible reason for the tablet not powering on could be a faulty power button. Sometimes, the power button may be stuck or not responding properly, preventing the tablet from turning on. In such cases, try gently pressing the power button multiple times to see if it loosens or responds. If not, it may require repair or replacement.

3. Software Glitch: Occasionally, a software glitch or a frozen system can cause the tablet to become unresponsive and refuse to power on. To troubleshoot this issue, try performing a soft reset by pressing and holding the power button and the volume down button simultaneously for about 10-15 seconds. This should force the tablet to restart and may resolve the issue.

4. Charging Cable or Adapter Issues: Sometimes, the charging cable or adapter may be faulty, preventing the tablet from receiving power. Try using a different charging cable and adapter to see if that resolves the issue.

5. Hardware Damage: In some cases, physical damage to the tablet, such as a broken screen or water damage, can prevent it from powering on. If you suspect physical damage, it is recommended to take the tablet to a professional technician for repair.

If none of the above troubleshooting steps resolve the issue, it is advisable to contact Samsung support or visit an authorized service center for further assistance.

Read Also: How to Solve the Android Stuck on Boot Screen Issue: Updated Solutions

Steps to troubleshoot and fix a Samsung Galaxy Tab S4 that won’t power on

If your Samsung Galaxy Tab S4 is not turning on, there are several steps you can take to troubleshoot and potentially fix the issue. Follow these steps to get your device up and running again:

Check the power source: Make sure your device is properly connected to a power source and that the charger is working. Try using a different charger or a different power outlet to eliminate the possibility of a faulty charger or power source.
Perform a soft reset: Press and hold the Power button and the Volume Down button simultaneously for about 10 seconds. This will force your device to restart if it is frozen or unresponsive.
Check for physical damage: Inspect your device for any physical damage, such as cracks or water damage. If there is visible damage, it may be causing the power issue and you may need to contact Samsung support or take your device to a professional repair service.
Try a hard reset: If your device is still not turning on, you can try performing a hard reset. This will erase all data on your device, so make sure you have a backup. To perform a hard reset, press and hold the Power button and the Volume Up button simultaneously for about 10 seconds.
Connect to a computer: If your device is still not responding, try connecting it to a computer using a USB cable. This will help determine if the issue is with the device itself or the display. If the device is recognized by the computer, it may be a problem with the display.
Contact Samsung support: If none of the above steps work, it is recommended to contact Samsung support or visit a Samsung service center. They will be able to assist you further and provide a solution for your specific issue.

Following these steps should help troubleshoot and fix the issue of a Samsung Galaxy Tab S4 that won’t power on. Remember to always keep your device updated and handle it with care to prevent any potential issues.

FAQ:

What should I do if my Samsung Galaxy Tab S4 is not turning on?

If your Samsung Galaxy Tab S4 is not turning on, you can try a few troubleshooting steps. First, make sure that the tablet has enough battery power by charging it for at least 10 minutes. If it still doesn’t turn on, try performing a soft reset by holding the power and volume down buttons together for 10-15 seconds. If that doesn’t work, you can try a hard reset by following the steps outlined in the article.

Why is my Samsung Galaxy Tab S4 not responding to the power button?

If your Samsung Galaxy Tab S4 is not responding to the power button, it could be due to a software issue or a hardware problem. You can try a soft reset by holding the power and volume down buttons together for 10-15 seconds. If that doesn’t work, you may need to perform a hard reset. If the issue persists, it is recommended to contact Samsung support or visit a service center for further assistance.

What should I do if my Samsung Galaxy Tab S4 is not charging or turning on?

If your Samsung Galaxy Tab S4 is not charging or turning on, there could be a problem with the charging port or the battery. First, make sure that you are using a genuine Samsung charger and cable. Try cleaning the charging port with a soft brush or a can of compressed air to remove any dust or debris. If that doesn’t work, you can try using a different charger and cable. If the tablet still doesn’t charge or turn on, it may require professional repair.