How To Fix Google Pixel that Won't Turn On: A Step-by-Step Guide

How To Fix Google Pixel that Wont Turn On

If your Google Pixel has suddenly stopped turning on and you can’t figure out why, don’t panic. There are several steps you can take to try and troubleshoot the problem before resorting to professional help or getting a new phone. In this guide, we will walk you through the step-by-step process of fixing a Google Pixel that won’t turn on, so you can get back to using your device in no time.

Step 1: Check the battery and charge your device

Table Of Contents

The first thing you should do when your Google Pixel won’t turn on is to check the battery. Make sure it’s not completely drained and that the charging cable is properly connected. If you see a low battery icon on the screen, leave your device plugged in for at least 30 minutes to see if it charges. If it still doesn’t turn on, try using a different charger or cable to rule out any issues with your current setup.

Step 2: Force restart your Pixel

If your Google Pixel is unresponsive and won’t turn on, a force restart might help. To do this, press and hold the power button for at least 30 seconds. If your device has a removable battery, remove it, then press and hold the power button for 30 seconds before reinserting the battery and trying to turn it on again.

Step 3: Boot your Pixel in recovery mode

If your Google Pixel still refuses to turn on, you can try booting it in recovery mode. To do this, press and hold the power and volume down buttons simultaneously for about 10-15 seconds. Once in recovery mode, use the volume buttons to navigate and the power button to select options. You can try clearing the cache partition or performing a factory reset to see if it resolves the issue.

Step 4: Contact Google Support

If none of the above steps work and your Google Pixel still won’t turn on, it’s time to reach out to Google Support for assistance. They may be able to provide further troubleshooting steps or advise you on any potential hardware issues. Make sure to provide them with all the details about the problem and any steps you’ve already taken to try and resolve it.

Please note that these are general troubleshooting steps and may not work in every situation. It’s always a good idea to back up your data regularly and seek professional help if you are unsure about performing any of the steps mentioned.

With this step-by-step guide, you should have a better understanding of how to fix a Google Pixel that won’t turn on. By following these troubleshooting steps, you can hopefully get your device up and running again without too much hassle. Remember to stay calm and patient throughout the process, and reach out to Google Support if needed.

How to Troubleshoot and Fix a Google Pixel that Won’t Turn On

If your Google Pixel won’t turn on, it can be a frustrating experience. However, there are several troubleshooting steps that you can take to try and fix the issue before seeking professional help. Here is a step-by-step guide to help you troubleshoot and fix a Google Pixel that won’t turn on.

1. Charge your Google Pixel:

Read Also: How to Find PUK Code on SIM Card - Step-by-Step Guide

Connect your Google Pixel to a charger using the original charging cable and adapter.
Make sure that the charger is plugged into a working power outlet.
Leave your Google Pixel connected to the charger for at least 30 minutes to ensure it has enough power.

2. Perform a hard reset:

Press and hold the power button and the volume down button simultaneously for about 10-15 seconds.
Your Google Pixel may vibrate and the Google logo may appear on the screen.
If the logo appears, release the buttons and wait for your device to start up.
If your Google Pixel still doesn’t turn on, proceed to the next step.

3. Boot into recovery mode:

Read Also: The role of the Internet in the development of modern business

Turn off your Google Pixel.
Press and hold the power button and the volume down button simultaneously until the bootloader menu appears.
Use the volume buttons to navigate to the “Recovery mode” option and press the power button to select it.
If you see an Android robot with a red exclamation mark, press and hold the power button and then press the volume up button once.
Use the volume buttons to navigate to the “Wipe data/factory reset” option and press the power button to select it.
Wait for the process to complete and then select the “Reboot system now” option.

4. Contact Google Support:

If none of the above steps work and your Google Pixel still won’t turn on, it may be a hardware issue. Contact Google Support or visit an authorized service center for further assistance.

By following these troubleshooting steps, you should be able to fix a Google Pixel that won’t turn on in most cases. However, if the problem persists, it is recommended to seek professional help to diagnose and repair the issue.

Step 1: Check the Power Button and Charging Cable

When your Google Pixel doesn’t turn on, the first thing you should do is check the power button and charging cable. Sometimes, the power button may be stuck or not functioning properly, preventing the device from turning on.

Start by pressing and holding the power button for at least 10 seconds. If the device doesn’t respond, try using a different charging cable and power adapter. A faulty or damaged charging cable can prevent the device from receiving power and charging properly.

Additionally, make sure the charging cable is securely connected to both the device and the power source. Sometimes, a loose connection can cause issues with charging and power delivery.

If the power button and charging cable seem to be in working condition, move on to the next step to troubleshoot further.

Step 2: Perform a Hard Reset on your Google Pixel

If your Google Pixel is still not turning on after trying the previous steps, you can attempt a hard reset. This process will force your device to power off and restart, which can help resolve any software issues that may be causing the problem.

Press and hold the Power button on your Google Pixel for about 30 seconds. Make sure you hold it down for the full duration.
Release the Power button and wait a few seconds.
Press and hold the Volume Down button and the Power button simultaneously for about 10 seconds.
Release both buttons when your device vibrates and the Google logo appears on the screen.
Your Google Pixel will now boot into Recovery Mode.
Using the volume buttons to navigate and the Power button to select, scroll down to the “Wipe data/factory reset” option and select it.
Confirm the action by selecting “Yes” on the next screen.
Wait for the reset process to complete. This may take a few minutes.
Once the process is finished, select the “Reboot system now” option.

Your Google Pixel will now restart and hopefully, it will turn on without any issues. If the problem persists, it may be necessary to contact Google support or take your device to a professional technician for further assistance.

FAQ:

What should I do if my Google Pixel won’t turn on?

If your Google Pixel won’t turn on, there are several troubleshooting steps you can try. First, make sure your phone has enough charge by connecting it to a power source. If that doesn’t work, try force restarting your phone by holding down the power button for about 15 seconds. If that still doesn’t work, you can try booting your phone into recovery mode or contacting Google support for further assistance.

What if none of the troubleshooting steps work?

If none of the troubleshooting steps work and your Google Pixel still won’t turn on, it may be a hardware issue. In this case, it’s best to contact Google support or bring your phone to a professional repair service. They will be able to diagnose and fix the issue for you.