4 Easy Steps to Fix Black Screen of Death on Poco M3 Pro

How to Fix Black Screen of Death on Poco M3 Pro

Experiencing a black screen of death (BSOD) issue on your Poco M3 Pro can be frustrating, but don’t worry! In this guide, we will walk you through four easy steps to help you fix the problem and get your phone back up and running.

Table Of Contents

Step 1: Forced Restart

If your Poco M3 Pro’s screen is completely black and unresponsive, the first thing you should try is a forced restart. To do this, press and hold the power button and the volume up button simultaneously for about 10 to 20 seconds. This will force your phone to restart and may resolve the black screen issue.

Step 2: Soft Reset

If the forced restart didn’t work, you can try a soft reset. This method can be effective for fixing temporary software glitches that may have caused the black screen problem. To perform a soft reset, press and hold the power button until the power options menu appears. Then, tap on the “Restart” option to reboot your phone.

Step 3: Check Display Settings

If the black screen issue persists, it’s worth checking the display settings on your Poco M3 Pro. Make sure that the brightness level is not set to the lowest setting and that the auto-brightness feature is enabled. Additionally, check if any power-saving modes or other display-related settings are affecting the screen’s operation. Adjust these settings as needed to see if it resolves the problem.

Step 4: Professional Assistance

If none of the above steps work and your Poco M3 Pro is still suffering from the black screen of death, it’s recommended to seek professional assistance. Contact the customer support of Poco or visit an authorized service center to have your device examined and repaired by experts.

In conclusion, dealing with a black screen of death on your Poco M3 Pro can be frustrating, but these steps should help you resolve the issue. Remember to always backup your data regularly to avoid any potential loss. If the problem persists, don’t hesitate to seek professional help to get your phone back in working order.

How to Fix Black Screen of Death on Poco M3 Pro

If you are facing the Black Screen of Death issue on your Poco M3 Pro, don’t worry, you are not alone. This issue can be caused by various reasons, including software glitches, hardware problems, or even a faulty display. Luckily, there are several steps you can take to try and fix the issue yourself before seeking professional help.

Perform a Forced Restart: Press and hold the Power button and Volume Up button simultaneously for about 10 seconds. This will force the phone to restart and may fix the black screen issue if it was caused by a software glitch.
Charge Your Phone: Connect your Poco M3 Pro to a power source using the original charger and cable. Leave it for at least 30 minutes to ensure that the battery is not completely drained. Sometimes, a black screen can be caused by a dead battery.
Boot into Safe Mode: Safe mode allows your phone to run with only the essential system apps and services. To enter safe mode on your Poco M3 Pro, press and hold the Power button until the power options menu appears. Then, press and hold the “Power Off” option until you see the “Reboot to safe mode” message. Tap “OK” to boot into safe mode. If the black screen issue is resolved in safe mode, it indicates that a third-party app is responsible. You can uninstall recently installed apps to fix the problem.
Factory Reset: If none of the above steps work, you can try performing a factory reset to solve the black screen issue. However, please note that a factory reset will erase all data on your phone, so make sure to back up any important files or data before proceeding. To perform a factory reset, go to “Settings” > “System” > “Reset” > “Erase all data”. Follow the on-screen instructions to complete the process.

If the black screen issue persists even after trying all of the above steps, it is recommended to contact the Poco customer support or visit an authorized service center for further assistance. They will be able to diagnose the problem and provide a proper solution.

Step 1: Restart the Device

If you’re experiencing a black screen of death issue on your Poco M3 Pro, the first troubleshooting step you should take is to restart the device. This simple action can often resolve minor software glitches that may be causing the black screen.

To restart your Poco M3 Pro, follow these steps:

Press and hold the power button on the right side of the device.
A menu will appear on the screen with options such as Power off, Restart, and Emergency mode.
Tap on the “Restart” option.
Your device will then begin the restart process. Wait for it to completely power off and then turn back on.

After the device restarts, check if the black screen issue is resolved. If not, proceed to the next troubleshooting step.

Read Also: Top 10 best online games to play in 2023: expected hits and popular projects

Step 2: Boot into Safe Mode

If you’re experiencing the black screen of death on your Poco M3 Pro, booting into Safe Mode can help you determine if a third-party app is causing the issue. Safe Mode disables all third-party apps, allowing you to isolate the problem and potentially fix it.

Here’s how you can boot the Poco M3 Pro into Safe Mode:

Press and hold the power button on your Poco M3 Pro until the power menu appears.
Long-press the Power off option in the menu until the Safe Mode prompt appears.
Tap OK to confirm and boot your device into Safe Mode.

Once your Poco M3 Pro has booted into Safe Mode, observe if the black screen issue still persists. If the black screen is no longer present, it indicates that a third-party app is causing the problem. You can then proceed to uninstall recently installed apps or perform a factory reset to resolve the issue.

If the black screen issue persists even in Safe Mode, it suggests a more severe software or hardware problem. In such cases, you may need to seek professional assistance or contact the Poco service center for further troubleshooting or repairs.

Step 3: Clear Cache Partition

One of the common causes of the black screen of death on Poco M3 Pro is a corrupted cache partition. Clearing the cache partition can help resolve the issue. Follow the steps below to clear the cache partition:

Turn off your Poco M3 Pro by pressing and holding the power button.
Once the device is turned off, press and hold the volume up button and the power button simultaneously. Keep holding the buttons until the device vibrates.
Release the power button but continue holding the volume up button until the Mi logo appears on the screen. This will boot your device into recovery mode.
In recovery mode, use the volume buttons to navigate and the power button as the selection button. Select the “Wipe & Reset” option.
Next, select the “Wipe Cache” option and confirm the action by selecting “Yes”.
Wait for the cache partition to be cleared. Once done, select the “Reboot system now” option to restart your Poco M3 Pro.

After clearing the cache partition, check if the black screen of death issue is resolved. If the problem persists, proceed to the next step.

Read Also: Worldwide spread of malicious po po that could drive cash out of ATMs

Step 4: Factory Reset the Device

If the previous steps did not resolve the black screen issue on your Poco M3 Pro, you can try performing a factory reset on your device. This will erase all data and settings on your phone, so make sure to back up any important files before proceeding.

Go to the Settings app on your Poco M3 Pro.
Scroll down and tap on “Additional settings”.
Tap on “Backup & reset”.
Tap on “Factory data reset”.
Review the information on the screen and tap on “Reset phone”.
If prompted, enter your screen lock PIN, password, or pattern.
Tap on “Next” and then tap on “Delete all data”.
Wait for the reset process to complete.
Once the reset is finished, your Poco M3 Pro will restart and the black screen issue should be resolved.

Note that performing a factory reset will erase all data on your device, including apps, contacts, and personal files. Make sure to back up any important information before proceeding. Also, keep in mind that a factory reset should be considered as a last resort if other troubleshooting steps did not work.

FAQ:

What is the black screen of death on Poco M3 Pro?

The black screen of death on Poco M3 Pro is a common issue where the phone’s screen turns completely black and becomes unresponsive to touch or any other inputs.

How can I fix the black screen of death on Poco M3 Pro?

You can fix the black screen of death on Poco M3 Pro by following these 4 easy steps: 1. Force restart the phone, 2. Charge the phone, 3. Boot the phone into safe mode, 4. Perform a factory reset.

What should I do if my Poco M3 Pro has a black screen and won’t respond to any input?

If your Poco M3 Pro has a black screen and won’t respond to any input, you can try force restarting the phone by holding the power button and volume down button together for about 10 seconds. If that doesn’t work, you can try charging the phone or booting it into safe mode.

Why did my Poco M3 Pro’s screen suddenly turn black?

There could be several reasons why your Poco M3 Pro’s screen suddenly turned black. It could be due to a software issue, a hardware malfunction, or a combination of both. It’s best to try the troubleshooting steps mentioned in the article to identify and fix the problem.

Will performing a factory reset on my Poco M3 Pro delete all my data?

Yes, performing a factory reset on your Poco M3 Pro will delete all the data stored on the phone’s internal storage. It’s recommended to back up your important data before performing a factory reset.

What is the Black Screen of Death?

The Black Screen of Death refers to a situation where the screen of a device, such as a smartphone, turns black and becomes unresponsive. It is a common issue that occurs on various devices, including the Poco M3 Pro.

Why does the Black Screen of Death occur on the Poco M3 Pro?

The Black Screen of Death on the Poco M3 Pro can occur due to a variety of reasons, such as software glitches, incompatible apps, or a malfunctioning hardware component. It can also happen after a firmware update or when the device’s battery is critically low.