How to Troubleshoot and Fix Galaxy Tab A Not Turning On or Being Unresponsive - Easy Solutions

How to fix Galaxy Tab A won’t turn on | No Power or not responding

How to Troubleshoot and Fix Galaxy Tab A Not Turning On or Being Unresponsive - Easy Solutions

If you’re facing issues with your Samsung Galaxy Tab A not turning on or being unresponsive, you’re not alone. This can be a frustrating problem to deal with, but there are some easy solutions you can try before seeking professional help.

Table Of Contents

One potential reason for your Galaxy Tab A not turning on could be a drained battery. In this case, all you need to do is to connect your tablet to a power source and let it charge for a while. Make sure you’re using a working charger and cable, and that the power outlet is functional. If your tablet still doesn’t turn on after charging, try performing a soft reset by holding down the power button for at least 10 seconds. This can sometimes help resolve minor software glitches that may be preventing your tablet from turning on.

If your Galaxy Tab A is still unresponsive, it’s possible that the problem lies with its display. Try force restarting your tablet by holding down the power button and the volume down button simultaneously for about 10 seconds. If the Samsung logo appears, release the buttons and your tablet should restart. If this doesn’t work, you may need to consider bringing your tablet to a professional technician for further examination and possible repair.

In some cases, third-party apps or a software update may be causing your Galaxy Tab A to become unresponsive. Try booting your tablet into safe mode by holding down the power button until the power off option appears. Then, press and hold the power off option and you will be prompted to enter safe mode. This mode disables all third-party apps, allowing you to determine if one of them is causing the issue. If your tablet functions normally in safe mode, try uninstalling recently installed apps or performing a factory reset to resolve any software conflicts.

Remember, troubleshooting and fixing a Galaxy Tab A that is not turning on or being unresponsive may require some trial and error. Start with the basic solutions mentioned above and gradually move on to more advanced troubleshooting steps if necessary. If you’re unable to resolve the issue on your own, it’s always recommended to reach out to a professional technician for assistance.

Read Also: Learn How to Utilize the New Animal Crossing NookLink App in 2023!

Troubleshoot and Fix Galaxy Tab A Not Turning On

Is your Galaxy Tab A not turning on? This issue can be frustrating, but there are several troubleshooting steps you can take to fix the problem and get your tablet up and running again. Here are some easy solutions to try:

Charge your tablet: Make sure that your Galaxy Tab A has enough battery power. Connect it to a charger and wait for a few minutes to see if it turns on.
Force restart: If your tablet is unresponsive, try performing a force restart. Press and hold the Power button and the Volume Down button simultaneously for about 10-15 seconds until the device vibrates and the Samsung logo appears.
Check the power button: Sometimes, the power button may be stuck or damaged. Inspect the power button for any physical damage or debris that may be preventing it from functioning properly.
Try a different charger and cable: It’s possible that the charger or cable you’re using is faulty. Test your tablet with a different charger and cable to see if that resolves the issue.
Clean the charging port: Over time, the charging port may accumulate dust or debris, which can prevent the tablet from charging. Use a soft brush or toothpick to gently clean the charging port and remove any obstructions.
Perform a factory reset: If none of the above solutions work, you can try performing a factory reset. Keep in mind that this will erase all data on your tablet, so make sure to back up any important files before proceeding.

If you’ve tried all of the above solutions and your Galaxy Tab A still won’t turn on, it may be a hardware issue. In that case, it’s best to contact Samsung support or visit a professional technician for further assistance.

Check the Power Source and Charging Cable

If your Galaxy Tab A is not turning on or is unresponsive, the first thing to check is the power source and charging cable. Follow these steps to troubleshoot and fix the issue:

Make sure that the power source you are using is working properly. Plug in another device or charger to verify if it is providing power.
Inspect the charging cable for any visible damage or frayed wires. If you see any, replace the cable with a new one.
Try using a different charging cable to rule out any issues with the current cable.
Connect the charging cable securely to both the power source and your Galaxy Tab A. Ensure that it is plugged in firmly.
Leave your device connected to the charger for at least 30 minutes to see if the battery has enough power to turn on.

If the power source and charging cable are functioning properly and your Galaxy Tab A still does not turn on or respond, proceed to the next troubleshooting steps.

Perform a Hard Reset

If your Samsung Galaxy Tab A is not turning on or is unresponsive, performing a hard reset can help solve the issue. A hard reset will force the device to restart and can often fix minor software glitches or freezes.

Please note that performing a hard reset will erase all data and settings on your device, so it is recommended to back up any important files before proceeding.

Read Also: Unlock Xiaomi Redmi Note 8 Pro Developer Options: A Step-by-Step Guide

Press and hold the Power button and the Volume Up button simultaneously for about 10 seconds.
Release both buttons when the Samsung logo appears on the screen.
Wait for the Recovery Mode menu to appear.
Use the Volume Up and Volume Down buttons to navigate through the menu options.
Select the “Wipe data/factory reset” option using the Power button.
Confirm the action by selecting “Yes” on the following screen.
Wait for the device to reset to its factory settings.
Select the “Reboot system now” option to restart your Galaxy Tab A.

After performing a hard reset, your device should power on normally. If the issue persists, it may be necessary to contact Samsung support or bring your tablet to an authorized service center for further assistance.

Update or Reinstall the Firmware

If your Galaxy Tab A is not turning on or being unresponsive, one possible solution is to update or reinstall the firmware. Firmware is the software that runs on your device and controls its functions. Updating or reinstalling the firmware can fix any software issues that may be causing the problem.

To update or reinstall the firmware on your Galaxy Tab A, follow these steps:

Make sure your device is connected to a stable Wi-Fi network or has a strong cellular signal.
Go to the “Settings” app on your device.
Scroll down and tap on “Software Update”.
Tap on “Download and Install” to check for any available updates.
If an update is available, tap on “Install Now” to update the firmware.
If there is no update available or updating the firmware doesn’t solve the problem, you can try reinstalling the firmware.
Visit the official website of your device’s manufacturer and look for the appropriate firmware for your Galaxy Tab A model.
Download the firmware file to your computer.
Connect your device to the computer using a USB cable.
Put your device into “Download Mode”. To do this, turn off your device and then press and hold the Power, Volume Down, and Home buttons at the same time until you see the warning screen.
Open the firmware flashing tool on your computer (e.g., Odin for Samsung devices).
Follow the instructions provided by the tool to install the firmware. This usually involves selecting the firmware file you downloaded, selecting the necessary options, and then starting the installation process.
Wait for the firmware installation to complete. This may take some time, so be patient.
Once the installation is finished, your device will automatically reboot.

After updating or reinstalling the firmware, check if your Galaxy Tab A is turning on and functioning properly. If the problem persists, you may need to contact customer support or visit a service center for further assistance.