How To Fix PS5 Controller Not Working On

How to troubleshoot and resolve PS5 controller not working issues

Playing games with a PS5 controller can be a thrilling experience, but what if it suddenly stops working on your gaming PC? This can be frustrating, especially when you’re in the middle of an intense game. However, don’t panic just yet! There are several solutions you can try to get your PS5 controller working again on your gaming PC.

The first thing you should do is check the connection between your PS5 controller and your gaming PC. Make sure the controller is properly connected and that there are no loose or damaged cables. If you’re using Bluetooth to connect your controller, make sure it’s enabled on both your controller and your PC.

Table Of Contents

If the connection seems fine, the next step is to check the drivers for your PS5 controller. Sometimes, outdated or incompatible drivers can cause the controller to stop working. You can update the drivers manually by going to the device manager and selecting the controller under the “Human Interface Devices” category. Alternatively, you can use a driver update tool to automatically update all your drivers.

If updating the drivers doesn’t resolve the issue, you can try resetting your PS5 controller. To do this, look for a small hole on the back of the controller and use a paperclip or a pin to press the reset button inside. Hold the button for a few seconds and then release it. After resetting the controller, try connecting it to your gaming PC again.

If none of these solutions work, it’s possible that there’s a hardware issue with your PS5 controller. In this case, you may need to contact Sony customer support or consider getting a replacement controller. It’s also worth trying the controller on a different device to see if the issue persists.

In conclusion, a PS5 controller not working on a gaming PC can be fixed by checking the connection, updating the drivers, resetting the controller, and considering hardware issues. By following these steps, you should be able to get your PS5 controller working again and get back to enjoying your favorite games.

Remember to always keep your drivers up to date and take care of your PS5 controller to prevent any future issues. Happy gaming!

Common PS5 Controller Problems and How to Fix Them

PS5 controller is a crucial accessory for enjoying gaming on your PlayStation 5 console. However, like any other electronic device, it can encounter certain issues that may impede its normal functioning. Here are some common problems you may face with your PS5 controller and how to fix them:

Controller not connecting to the console: If your PS5 controller is not connecting to the console, try the following troubleshooting steps:
Make sure the controller is sufficiently charged by connecting it to the console with a USB cable.
Reset the controller by pressing the small reset button on the back using a paperclip or a similar object.
Turn off the console and unplug it from the power source, then wait for a few minutes before plugging it back in and turning it on again.
Try connecting the controller to the console using a different USB cable or a different USB port.
Controller buttons not responsive: If the buttons on your PS5 controller are not responsive, try the following solutions:
Check if the controller firmware is up to date and update it if necessary.

Read Also: Boost the Volume: 7 Best Audio Volume Booster Apps for Android in 2023

8. Remove any dirt or debris from the buttons using a can of compressed air or a small brush. 9. Reset the controller by pressing the small reset button on the back using a paperclip or a similar object. 10. If the problem persists, consider contacting Sony customer support for further assistance. 11. Controller analog sticks drifting: If your PS5 controller analog sticks drift, meaning they move on their own without any input, try the following fixes:

12. Reset the controller by pressing the small reset button on the back using a paperclip or a similar object. 13. Calibrate the analog sticks in the PlayStation 5 settings. Go to Settings > Accessories > Controllers > [Your Controller] > Calibration. 14. If the problem persists, consider cleaning the analog sticks using isopropyl alcohol and a cotton swab. 15. If the issue still persists, you may need to replace the controller or seek professional repair.

Read Also: How To Fix Diablo 4 Crashing On Xbox One - Troubleshooting Guide

16. Controller not charging: If your PS5 controller is not charging, try the following steps: 17. Make sure the USB cable is securely connected to both the controller and the console. 18. Try connecting the controller to a different USB port or using a different cable. 19. Check if the USB port you are using provides enough power to charge the controller. 20. If none of the above solutions work, there may be an issue with the controller’s battery or charging port. Consider contacting Sony customer support for further assistance.

Remember to always handle your PS5 controller with care and avoid exposing it to excessive heat, water, or physical damage to prevent any future problems. Regularly updating the controller’s firmware and keeping it clean can also help maintain its performance.

PS5 Controller Not Connecting Wirelessly

If your PS5 controller is not connecting wirelessly to your console, try the following troubleshooting steps:

Make sure the controller is fully charged. Connect it to the console using a USB cable and allow it to charge for a while. A low battery level can cause connection issues.
Reset the controller by locating the small reset button on the back of the controller, near the L2 button. Insert a small object, such as a paperclip, into the reset button and hold it down for a few seconds. This will reset the controller’s wireless connection.
Turn off the console and disconnect it from the power source. Wait for a few minutes, then plug it back in and turn it on again. This can help refresh the console’s wireless connections and fix any temporary issues.
Check for any wireless interference. Move any devices that may be causing interference, such as other wireless devices or routers, away from the console and controller. This can help improve the wireless connection.
Make sure the controller is within range of the console. If you are too far away from the console, the wireless connection may be weak or nonexistent. Move closer to the console and see if the connection improves.
Try connecting the controller using a USB cable. If the controller can connect via USB, but not wirelessly, there may be an issue with the console’s wireless receiver. Contact Sony’s support for further assistance.

If none of the above steps work, there may be a hardware issue with the controller. Consider contacting Sony or the retailer where you purchased the controller for further troubleshooting or a possible replacement.

PS5 Controller Buttons Not Responding

Check the Battery Level: Ensure that the controller has enough battery power by connecting it to the console using a USB cable. If the battery is low, charge it until the battery indicator shows a full charge.
Restart the Controller: Press and hold the PS button on the controller for a few seconds until the menu appears. Select “Restart” to reset the controller.
Reconnect the Controller: If the controller is not responding, disconnect it from the console and reconnect it. Make sure the controller and console are in sync by following the pairing instructions in the console’s user manual.
Check for Firmware Updates: Make sure the firmware of both the console and the controller are up to date. Check for updates in the settings menu of the console and the controller’s manufacturer website.
Test the Controller on Another Device: Connect the controller to another device, such as a PC or another console, to see if the issue persists. If the controller works on another device, the issue may be with the console, and further troubleshooting may be required.
Clean the Controller: Dust and debris can hinder the buttons’ functionality. Use a soft cloth or a can of compressed air to clean the controller, especially around the buttons.
Contact Support: If none of the above solutions work, contact the manufacturer’s support team for further assistance. They may be able to provide additional troubleshooting steps or arrange for a repair or replacement if necessary.

PS5 Controller Not Charging

If your PS5 controller is not charging, there are a few steps you can take to troubleshoot the issue:

Check the USB cable: Ensure that the USB cable you are using to connect the controller to a power source is not damaged or faulty. Try using a different USB cable to see if that resolves the charging issue.
Try a different power source: Test the controller with a different power source, such as a different USB port on your console or a different wall adapter. Sometimes, the issue may be with the power source rather than the controller.
Reset the controller: Reset the PS5 controller by locating the small reset button on the back of the controller near the L2 button. Use a small pin or a paperclip to press and hold the reset button for a few seconds. After resetting, try charging the controller again.
Clean the charging port: Sometimes, the charging port on the controller may have debris or dust, preventing proper charging. Use a can of compressed air or a small brush to gently clean the charging port. Be careful not to damage the port while cleaning.
Check for firmware updates: Ensure that your PS5 controller is up to date with the latest firmware. Connect the controller to your console using a USB cable and check for any available firmware updates in the system settings. Install any updates and see if that resolves the charging issue.
Try a different controller: If none of the above steps work, try charging a different PS5 controller with the same USB cable and power source. If the other controller charges successfully, it may indicate an issue with the original controller that needs further troubleshooting or repair.

If you have tried all of the above steps and your PS5 controller still does not charge, it may be necessary to contact Sony customer support for further assistance or consider getting a replacement controller.

FAQ:

My PS5 controller is not working. What should I do?

If your PS5 controller is not working, there are a few troubleshooting steps you can try. First, make sure the controller is properly connected to your PS5 console. If it is, try resetting the controller by pressing the reset button on the back. If that doesn’t work, try connecting the controller to the console using a USB cable to see if that solves the issue. If none of these steps fix the problem, you may need to contact Sony for further support or consider getting a replacement controller.

Why is my PS5 controller not connecting to my console?

If your PS5 controller is not connecting to your console, there could be a few potential reasons. First, make sure the controller is properly charged. If the battery is low, the controller may not have enough power to connect. Additionally, check if the PS5 console is in Bluetooth pairing mode and try restarting both the console and the controller. If the issue persists, there may be a problem with the controller or the console’s Bluetooth connectivity, and you may need to seek further assistance from Sony.

Can I use a PS4 controller with my PS5 if the PS5 controller is not working?

Yes, you can use a PS4 controller with your PS5 if the PS5 controller is not working. The PS5 is backwards compatible with the PS4 controller, so you can still play games using the PS4 controller while you troubleshoot or replace the PS5 controller. Simply connect the PS4 controller to the PS5 console using a USB cable or pair it via Bluetooth, and it should work seamlessly.

My PS5 controller’s buttons are not responding. How can I fix this problem?

If your PS5 controller’s buttons are not responding, there are a few things you can try. First, make sure the controller is properly charged or connected to the console. If the buttons are still not responding, try resetting the controller by pressing the reset button on the back. If that doesn’t work, there may be a hardware issue with the controller, and you may need to contact Sony or consider getting a replacement.

My PS5 controller’s analog sticks are not working properly. What can I do to fix this?

If your PS5 controller’s analog sticks are not working properly, you can try a few potential solutions. First, make sure there is no debris or dirt interfering with the sticks. Gently clean the sticks using a microfiber cloth or a cotton swab dipped in rubbing alcohol. If that doesn’t solve the issue, try resetting the controller by pressing the reset button on the back. If the problem persists, there may be a hardware problem with the analog sticks, and you may need to contact Sony for further assistance.