How To Fix Bose Soundlink Revolve+ Won't Charge - Troubleshooting Guide

post-thumb

How To Fix Bose Soundlink Revolve+ Won’t Charge

If you’re experiencing issues with your Bose Soundlink Revolve+ not charging, don’t worry - you’re not alone. Many users have encountered this problem and there are a few common solutions that may help you resolve it. In this troubleshooting guide, we’ll walk you through step-by-step instructions on how to fix your Soundlink Revolve+ so that you can continue enjoying your music.

Firstly, it’s important to check if the problem lies with the charging cable. Sometimes, the cable may become loose or damaged, preventing a proper connection between the Soundlink Revolve+ and the power source. Make sure that the cable is securely plugged into both the speaker and the power outlet. Try using a different charger or cable to see if that resolves the issue. If the problem persists, it’s time to move on to the next troubleshooting step.

Table Of Contents

Next, you’ll want to reset your Soundlink Revolve+. To do this, simply press and hold the power button for about 10 seconds until the device turns off. Then, release the button and turn the speaker back on to see if it starts charging. Resetting the device can often fix minor software glitches that may be causing the charging problem.

If resetting doesn’t work, you may need to update the firmware of your Soundlink Revolve+. Bose periodically releases firmware updates that can improve the performance and resolve any known issues. Connect your speaker to a computer using the USB cable and visit the official Bose website to check for any available updates. Follow the instructions provided to download and install the latest firmware for your device. After the update is complete, try charging the speaker again to see if the issue has been resolved.

If none of the above solutions work, it’s possible that there is a hardware problem with your Soundlink Revolve+. In this case, it’s recommended to contact Bose customer support for further assistance. They will be able to guide you through additional troubleshooting steps or help you arrange for a repair or replacement if necessary. Remember to provide them with detailed information about the issue and any steps you’ve already taken to troubleshoot it.

By following these troubleshooting steps, you should be able to fix the charging issue with your Bose Soundlink Revolve+ and continue enjoying your music on-the-go. Remember to always use genuine Bose accessories and keep your speaker updated to ensure optimal performance.

Note: The Bose Soundlink Revolve+ mentioned in this article refers to the portable Bluetooth speaker model and not any other product or device.

How To Fix Bose Soundlink Revolve+ Won’t Charge - Troubleshooting Guide

If your Bose Soundlink Revolve+ is not charging properly, there are a few troubleshooting steps you can try to fix the issue. Here are some possible solutions to help you get your speaker charging again:

  1. Make sure the charging cable is securely connected to both the speaker and the power source. Check for any loose connections or damage to the cable. If necessary, try using a different charging cable to see if that resolves the issue.
  2. Check the power source you are using to charge the speaker. Make sure the outlet or USB port is providing power and is not faulty. You can try plugging another device into the same power source to confirm it is working properly.
  3. Inspect the charging port on the speaker for any dirt, debris, or damage. Use a soft, dry cloth or a compressed air canister to clean out any dust or particles that may be blocking the charging connection.
  4. Restart the speaker by turning it off and then back on again. This can help reset any software issues that may be causing the charging problem.
  5. Try connecting the speaker to a different power source, such as a different outlet or USB port. Sometimes, there may be an issue with the original power source that is preventing the speaker from charging properly.
  6. If none of the above steps work, you may need to perform a firmware update on your Bose Soundlink Revolve+. Check the Bose website for any available firmware updates and follow the instructions to update your speaker. Updating the firmware can often resolve charging issues.

If you have tried all of the troubleshooting steps and your Bose Soundlink Revolve+ still won’t charge, it may be a hardware issue. In that case, you may need to contact Bose customer support or visit a Bose authorized service center for further assistance.

Remember to always handle your Bose Soundlink Revolve+ with care and avoid exposing it to excessive heat, moisture, or extreme temperatures, as these conditions can affect the charging and overall performance of the speaker.

By following these troubleshooting steps, you should be able to fix the charging issue with your Bose Soundlink Revolve+ and continue enjoying your music on the go.

Solution 1: Check the Power Source

If your Bose Soundlink Revolve+ won’t charge, the first thing you should do is check the power source. Ensure that the charger is properly plugged into a working power outlet or USB port. You can also try using a different power adapter or USB cable to see if the issue lies with the charging accessories.

Make sure there is no damage to the power cord or USB cable. Check for any frayed wires or visible damage that could prevent the proper flow of electricity. If you find any damage, it’s best to replace the cable or charger with a new one.

Read Also: What is lockout mode? When and how to use it?

Also, try connecting the Soundlink Revolve+ to a different power outlet or USB port to see if that resolves the charging issue. Sometimes, the problem can be with the power source itself.

It’s worth noting that the Soundlink Revolve+ can take up to 4 hours or more to fully charge, depending on the battery level. So, make sure to leave it plugged in for a sufficient amount of time to see if it starts charging.

Read Also: How to reach 120 fps on Fortnite on PlayStation 5: tips and tricks

If none of the above steps work, you may need to consider other troubleshooting solutions to fix the charging issue with your Bose Soundlink Revolve+.

Solution 2: Reset the Speaker

If your Bose Soundlink Revolve+ won’t charge, you can try resetting the speaker. Here’s how:

  1. Disconnect any cables connected to the speaker.
  2. Turn off the speaker by pressing and holding the Power button for about 10 seconds.
  3. Once the speaker is off, press and hold the Multi-function button and the Volume - button simultaneously for 10 seconds.
  4. Release the buttons when the light on the speaker blinks and the speaker emits a tone.
  5. Turn on the speaker and check if it charges properly.

If the speaker still won’t charge after resetting, you can try the other solutions mentioned in this troubleshooting guide.

Solution 3: Replace the Battery

If the previous solutions did not fix the issue, the problem might be with the battery. Over time, the battery may wear out and no longer hold a charge. In this case, replacing the battery can solve the problem.

Here are the steps to replace the battery on your Bose Soundlink Revolve+:

  1. Contact Bose Support: Before attempting to replace the battery, it is recommended to contact Bose support for assistance. They can provide guidance and advice specific to your device.
  2. Order a Replacement Battery: If Bose support confirms that the battery needs to be replaced, they will direct you to order a replacement battery. Make sure to purchase a genuine Bose replacement battery to ensure compatibility and performance.
  3. Prepare the Device: Power off your Bose Soundlink Revolve+ and disconnect it from any power source or cables. Place it on a clean and soft surface.
  4. Remove the Base Cap: Gently remove the base cap from the bottom of the device. You may need to use a small screwdriver or a pry tool to carefully lift it off.
  5. Remove the Screws: Once the base cap is removed, you will see a set of screws holding the bottom panel in place. Use a screwdriver to remove these screws.
  6. Open the Device: After removing the screws, carefully separate the bottom panel from the main body of the device. Be cautious not to damage any internal components.
  7. Replace the Battery: Locate the battery inside the device and disconnect any cables or connectors attached to it. Remove the old battery and replace it with the new one.
  8. Reassemble the Device: Once the new battery is in place, carefully reattach the bottom panel and secure it with the screws. Put the base cap back on.
  9. Test the Device: Connect your Bose Soundlink Revolve+ to a power source and turn it on. Check if it now charges properly and holds a charge.

If the battery replacement was successful, your Bose Soundlink Revolve+ should now charge as expected. If the issue persists, it is recommended to contact Bose support again for further troubleshooting.

Note: Battery replacement requires technical skill and knowledge. If you are not confident in performing this procedure yourself, it is best to seek professional assistance or have it done by an authorized service center.

FAQ:

If your Bose Soundlink Revolve+ is not charging, there could be several reasons for it. One possibility is that the charging cable or adapter is damaged or not functioning properly. Another reason could be a faulty battery in the speaker. It is also possible that there is a software issue causing the problem. To troubleshoot the issue, you can try using a different charging cable and adapter, resetting the speaker, or updating its firmware.

If your Bose Soundlink Revolve+ is not turning on, there are a few steps you can take to try and fix the issue. First, check if the speaker is charged by connecting it to a power source and looking for the charging indicator light. If the speaker is not charging, refer to the previous question for troubleshooting tips. If the speaker is fully charged but still not turning on, try resetting it by holding down the power button for 10 seconds. If that doesn’t work, contact Bose customer support for further assistance.

The battery on the Bose Soundlink Revolve+ is not user-replaceable, so you cannot fix it yourself. If you are experiencing battery issues with your speaker, such as it not holding a charge or draining quickly, it is recommended to contact Bose customer support for assistance. They may be able to provide a solution or arrange for a battery replacement if necessary.

Yes, the Bose Soundlink Revolve+ comes with a limited warranty. The specific terms and duration of the warranty may vary depending on your location and the place of purchase. It is recommended to check the warranty information provided by Bose or contact their customer support for more details on the warranty coverage for your speaker.

See Also:

    comments powered by Disqus

    You May Also Like