How to Fix a Wet Galaxy S9+ (Phone with Water Damage) That Won't Turn On - Step-by-Step Guide

post-thumb

How to fix a wet Galaxy S9+ (phone has water damage) that won’t turn on

Water damage is a common issue that can occur with smartphones, and the Samsung Galaxy S9+ is no exception. If you have accidentally spilled liquid on your Galaxy S9+ or dropped it in water, it may stop functioning properly or not turn on at all. In this step-by-step guide, we will walk you through the process of fixing a wet Galaxy S9+ that won’t turn on.

Table Of Contents

Step 1: Turn Off the Phone

The first thing you should do when your Galaxy S9+ gets wet is to turn off the phone immediately. This will help prevent any short circuits or further damage to the internal components. Press and hold the power button until the power menu appears, then select “Power off” to shut down your device.

Step 2: Remove the Sim Card Tray

Next, carefully remove the sim card tray from the top of your Galaxy S9+. Use a SIM card removal tool or a small paperclip to gently push the SIM card removal pin into the small hole on the tray. Once the tray pops out, take it out completely.

Step 3: Dry the Phone

After removing the sim card tray, dry the phone as quickly as possible. Use a soft, absorbent cloth to gently pat dry the exterior of the device. Avoid using heat sources such as a hairdryer, as they can cause further damage. Instead, leave the phone in a well-ventilated area to air dry.

Step 4: Rice or Silica Gel Packets

If your Galaxy S9+ has been exposed to a significant amount of water, you can try using rice or silica gel packets to absorb the moisture. Place the phone in a container filled with either rice or silica gel packets and leave it for at least 24 hours. These materials will help draw out the moisture from the internal components.

Step 5: Test the Phone

After the drying period, remove the phone from the rice or silica gel container and inspect it for any remaining moisture. If it appears dry, reinsert the sim card tray and try turning on the phone. If the phone still won’t turn on, you may need to seek professional help or contact Samsung for further assistance.

In conclusion, fixing a wet Galaxy S9+ that won’t turn on requires quick action and careful drying. By following these steps, you can increase the chances of saving your phone from water damage. However, keep in mind that water damage may void your warranty, so it’s important to handle your phone with care and take preventive measures to avoid potential accidents.

How to Fix a Wet Galaxy S9+ That Won’t Turn On - Step-by-Step Guide

If your Galaxy S9+ has been exposed to water and now it won’t turn on, don’t panic. There are steps you can take to try and fix the issue. Follow the step-by-step guide below to increase the chances of successfully restoring your phone.

Read Also: Technological advances in online casinos: new features and conveniences
  1. Remove your Galaxy S9+ from water immediately: If it’s still submerged, take it out as quickly as possible to prevent further damage.
  2. Power off your Galaxy S9+: If your phone is still on, power it off immediately. Press and hold the Power button until the power options appear, then tap “Power off”.
  3. Do not plug in or charge your phone: Avoid connecting your phone to a charger or any power source until it’s completely dry. Doing so can cause a short circuit.
  4. Remove the SIM card tray and SIM card: Open the SIM card tray using the SIM ejector tool provided with your phone. Take out the SIM card and set it aside.
  5. Remove the SD card (if applicable): If your Galaxy S9+ has an SD card, remove it to prevent potential data loss or damage.
  6. Dry your Galaxy S9+: Use a soft cloth or tissue to gently wipe off any visible water from the phone. Make sure to remove water from the charging port, headphone jack, and any other openings.
  7. Place your Galaxy S9+ in a dry environment: Find a safe and dry place to let your phone dry out completely. Avoid using heat sources like hair dryers, as they can damage the internal components.
  8. Wait at least 48 hours: Give your Galaxy S9+ ample time to dry. It’s essential to wait at least 48 hours before attempting to power it on again.
  9. Check for signs of moisture: After the drying period, inspect your phone for any remaining signs of moisture. Look for condensation on the screen or inside the charging port.
  10. Attempt to power on your Galaxy S9+: If there are no signs of moisture, reinsert the SIM card and SD card (if applicable), then press and hold the Power button to turn on your phone.
  11. Seek professional help if needed: If your Galaxy S9+ still won’t turn on after following these steps, it may require professional repair. Contact Samsung or a reputable smartphone repair service for assistance.

Remember, water damage can be unpredictable, and there’s no guarantee that these steps will revive a wet Galaxy S9+. However, following these guidelines gives you the best chance of restoring your phone to working condition.

Assess the Damage

When your Galaxy S9+ gets wet and won’t turn on, it’s important to assess the damage to determine the next steps to fix it:

  1. Do not turn on the device: If your Galaxy S9+ is wet, do not attempt to turn it on. This can cause further damage to the internal components.
  2. Remove any accessories: Take off any accessories such as phone cases, screen protectors, and SIM cards to prevent any potential damage.
  3. Inspect the exterior: Check for any visible signs of damage, such as water droplets, condensation, or corrosion. Pay close attention to the charging port and headphone jack, as they are commonly affected.
  4. Check for water indicators: Many smartphones, including the Galaxy S9+, have water damage indicators. These indicators change color when exposed to water, indicating that the device has been potentially damaged.
  5. Don’t panic: It’s important to stay calm and avoid panicking. Keep in mind that water damage doesn’t always mean the end of your device. With proper steps and timely measures, there is a good chance of fixing the issue.

Once you have assessed the damage, you can proceed to the next steps to try and fix your wet Galaxy S9+.

Power Off the Phone

If your Galaxy S9+ has encountered water damage and won’t turn on, the first step is to power off the phone. Immediately disconnecting the power source will help prevent further damage and increase the chances of successful recovery.

To power off the device:

  1. Press and hold the Volume Down button.
  2. While holding the Volume Down button, press and hold the Power button.
  3. Continue holding both buttons until the screen goes black and the Galaxy S9+ vibrates.

This forced shutdown will ensure that all power to the device is cut off, reducing the risk of short circuits or other electrical damage.

Read Also: Top 5 Motorcycle Phone Chargers for 2023 - Find the Best Models Here!

Once the phone is powered off, do not attempt to turn it on again as this could lead to more severe damage. Proceed to the next step to start the drying process.

Dry the Phone

After removing the phone from the water, it’s crucial to dry it as quickly as possible to prevent further damage. Here are the steps to effectively dry your Galaxy S9+:

  1. Do not turn on the phone or press any buttons.
  2. Remove any protective case or cover from the phone.
  3. Gently shake the phone to remove any excess water from the ports, speakers, and microphone.
  4. Use a clean, dry cloth to wipe the phone’s exterior.
  5. Pull out the SIM card tray and pat it dry with a cloth.
  6. Place the phone on a clean, absorbent surface like a towel or a paper towel.
  7. Position the phone in a way that allows air to circulate around it. Avoid placing it in direct sunlight or near a heat source as extreme heat can damage the internal components.
  8. Consider using a desiccant, such as uncooked rice or silica gel packets, to help absorb moisture. Place the phone and the desiccant in an airtight container and leave it for at least 24 hours.
  9. After the drying period, remove the phone from the container and check for any signs of moisture.

If the phone is completely dry, you can proceed with turning it on. However, if there are still signs of moisture or if the phone doesn’t power on, you may need to seek professional assistance or contact the manufacturer for further guidance.

Safety Tips:

DOsDON’Ts
* Act quickly and turn off the phone immediately.
  • Remove all accessories, including the SIM card and memory card.
  • Use a clean, dry cloth to wipe away the visible water.
  • Allow the phone to air dry in a well-ventilated area.
  • Use a desiccant like uncooked rice or silica gel packets to absorb moisture.
  • Monitor the phone for any signs of damage or malfunction. | * Do not turn on the phone or press any buttons.
  • Avoid using a hairdryer or any heat source.
  • Do not use compressed air as it can push water deeper into the phone.
  • Avoid shaking the phone vigorously as it can cause further damage.
  • Do not use the phone until it is completely dry.
  • Avoid tampering with the internal components. |

Following these steps and safety tips can help increase the chances of saving your wet Galaxy S9+ and preventing further damage. However, if the phone still doesn’t turn on or shows signs of malfunction after drying, it’s recommended to seek professional help or contact the manufacturer for assistance.

FAQ:

What should I do if my Galaxy S9+ has water damage and won’t turn on?

If your Galaxy S9+ has water damage and won’t turn on, the first thing you should do is to turn it off and remove the SIM card and any other removable parts. Then, dry the phone as much as possible using a soft cloth or towel. Next, put the phone in a bag of uncooked rice or use silica gel packs to absorb moisture from the device. Leave it in the bag for at least 48 hours. After that, try turning on the phone. If it still won’t turn on, you may need to contact a professional technician for further repair.

Can I use a hairdryer to dry my wet Galaxy S9+?

No, using a hairdryer to dry your wet Galaxy S9+ is not recommended. The heat from the hairdryer can cause damage to the internal components of the phone. It is best to let the phone air dry or use other methods such as rice or silica gel packs to absorb moisture.

Will putting my wet Galaxy S9+ in rice help fix the water damage?

Putting your wet Galaxy S9+ in a bag of uncooked rice can help absorb moisture from the device, but it does not guarantee to fix the water damage. Rice is often used as a home remedy, but it may not be as effective as using silica gel packs or other professional drying methods. It is important to still contact a professional technician if the phone does not turn on after drying it in rice.

How long should I leave my wet Galaxy S9+ in rice?

You should leave your wet Galaxy S9+ in a bag of uncooked rice for at least 48 hours. This allows enough time for the rice or silica gel packs to absorb moisture from the device. Leaving it for a shorter time may not be as effective in drying out the phone.

Is it possible to fix a wet Galaxy S9+ with water damage on my own?

It is possible to fix a wet Galaxy S9+ with water damage on your own, especially if the damage is minimal. By following proper drying methods such as turning off the phone, removing removable parts, drying with a soft cloth, and using rice or silica gel packs, you may be able to restore the functionality of the phone. However, if the phone still does not turn on after drying, it is recommended to contact a professional technician for further repair.

See Also:

comments powered by Disqus

You May Also Like