Galaxy Tab A 10.1 Won't Turn On? Here's How to Troubleshoot the No Power Issue (2019)

post-thumb

How to fix Galaxy Tab A 10.1 won’t turn on | troubleshooting Galaxy Tab A 10.1 (2019) No Power issue

If you’ve recently encountered an issue with your Samsung Galaxy Tab A 10.1 where it won’t turn on, you’re not alone. This problem can be frustrating, but luckily, there are several troubleshooting steps you can take to resolve the issue.

Table Of Contents

First, make sure that the tablet’s battery is not completely drained. Plug it into a wall charger using the original charger and cable, and let it charge for at least 15-30 minutes. If the battery was completely drained, the tablet may take a few minutes to show any signs of life.

If the tablet still won’t turn on after charging, try performing a hard reset. Press and hold the power button and the volume down button simultaneously for about 10-15 seconds. This should force the tablet to restart. If the problem persists, move on to the next step.

Next, check the power button for any physical damage or debris. The button may be stuck or unresponsive, preventing the tablet from powering on. Clean the button gently with a soft cloth and try pressing it again to see if it responds.

If you’ve tried all of the above steps and your Galaxy Tab A 10.1 still won’t turn on, it may be time to consider contacting Samsung support or bringing the tablet to an authorized service center. They can provide further assistance and diagnose any potential hardware issues that may be causing the problem.

In conclusion, experiencing a no power issue with your Galaxy Tab A 10.1 can be frustrating, but by following these troubleshooting steps, you may be able to resolve the problem and get your tablet up and running again.

Galaxy Tab A 10.1 Won’t Turn On?

If your Galaxy Tab A 10.1 tablet is not turning on, don’t worry, there are a few troubleshooting steps you can take to try and resolve the issue. Follow the steps below to troubleshoot the no power problem:

  1. Check the battery: Ensure that the tablet has enough battery power. Connect the tablet to a power source using the original charger and cable, and leave it connected for at least 15 minutes.
  2. Restart the tablet: Press and hold the power button for about 10 seconds until the tablet restarts.
  3. Perform a hard reset: If the tablet still doesn’t turn on, perform a hard reset. Press and hold the power button and volume down button simultaneously for about 10 seconds until the tablet vibrates and restarts.
  4. Check for physical damage: Inspect the tablet for any signs of physical damage such as cracks, water damage, or bent connectors. If you find any, contact Samsung support or visit a certified service center.
  5. Try a different charger and cable: If the original charger and cable are damaged or not working properly, try using a different charger and cable that are compatible with the tablet.
  6. Remove any external accessories: Disconnect any external accessories such as memory cards or USB devices from the tablet and try turning it on again.
  7. Software update: Ensure that your tablet is running the latest software version. Go to Settings > Software update and check for any available updates. If updates are available, download and install them.
  8. Contact Samsung support: If none of the above steps work, it may be a hardware issue. Contact Samsung support or visit a certified service center for further assistance.

By following these troubleshooting steps, you should be able to diagnose and resolve the no power issue with your Galaxy Tab A 10.1 tablet. However, if the problem persists, it’s best to seek professional help from Samsung support or a certified service center.

Troubleshooting the No Power Issue

If your Galaxy Tab A 10.1 won’t turn on, there are several steps you can take to troubleshoot the issue before seeking professional help. By following these troubleshooting steps, you may be able to resolve the no power issue on your own.

Read Also: 9 useful apps for college students
  1. Check the battery level: Connect your tablet to a power source and make sure the battery is not completely drained. Leave it charging for at least 15 minutes before attempting to turn it on.
  2. Inspect the charging cable and adapter: Check if the charging cable and adapter are in good condition and properly connected. Use a different charging cable and adapter if necessary.
  3. Perform a hard reset: Press and hold the Power button and Volume Down button simultaneously for about 10-15 seconds. This will force the tablet to restart, and it may resolve any temporary software issues causing the no power problem.
  4. Check for physical damages: Inspect the tablet for any signs of physical damage, such as a cracked screen or water damage. If you find any physical damages, you may need to seek professional repair.
  5. Attempt a forced restart: If the tablet is unresponsive and not turning on, press and hold the Power button for about 30 seconds. This should force a restart and may resolve any system issues causing the no power problem.

If none of the above steps resolve the no power issue, it is recommended to contact Samsung support or take your tablet to an authorized service center for further assistance. They will be able to diagnose and fix any hardware or software issues that are preventing your tablet from turning on.

Remember to backup your important data before seeking professional help, as they may need to perform a factory reset or other troubleshooting steps that could result in data loss.

Solutions to Fix the Problem

If your Galaxy Tab A 10.1 won’t turn on, there are several solutions you can try to troubleshoot the no power issue. We’ve compiled a list of possible fixes below:

  1. Check the power source: Make sure that your tablet is connected to a working power source. Try plugging it into a different outlet or using a different charger to see if that resolves the issue.
  2. Force restart your tablet: Press and hold the Power button and the Volume Down button simultaneously for about 10 seconds until the tablet restarts. This can help resolve minor software glitches or freezes that may be preventing the tablet from turning on.
  3. Check the battery: Ensure that the battery is not completely drained. Connect your tablet to a charger and let it charge for at least 30 minutes before attempting to turn it on again. If the battery was fully depleted, it may take some time before the tablet powers on.
  4. Remove any connected devices: Disconnect any accessories or peripherals that may be connected to your tablet, such as headphones, USB cables, or memory cards. Sometimes, faulty or incompatible devices can prevent the tablet from turning on or cause power issues.
  5. Perform a hard reset: If none of the above solutions work, you can try performing a hard reset on your tablet. This will erase all data and settings on your device, so make sure to back up any important data before proceeding. To perform a hard reset, follow these steps:
    1. Turn off your tablet.
    2. Press and hold the Power button and the Volume Up button simultaneously until the Samsung logo appears on the screen.
    3. Release both buttons and wait for the Android Recovery Menu to appear.
    4. Use the Volume Up and Volume Down buttons to navigate to the “Wipe data/factory reset” option.
    5. Press the Power button to select the option.
    6. Confirm your selection by navigating to the “Yes” option and pressing the Power button.
    7. Wait for the reset process to complete, and then select the “Reboot system now” option to restart your tablet.
  6. Seek professional assistance: If none of the above solutions work, it may be necessary to seek professional assistance. Contact Samsung customer support or visit an authorized service center to have your tablet examined and repaired.

By following these solutions, you should be able to troubleshoot and fix the no power issue with your Galaxy Tab A 10.1. Remember to always backup your important data before attempting any troubleshooting steps that involve resetting or erasing your device.

Latest Updates for Samsung Galaxy Tab A 10.1 (2019)

Keeping your Samsung Galaxy Tab A 10.1 (2019) up to date with the latest software updates is essential to ensure optimal performance and security. Samsung regularly releases firmware and software updates, which include bug fixes, performance improvements, and new features. Here are the latest updates for the Samsung Galaxy Tab A 10.1 (2019):

  • Software Version: Android 11 with One UI 3.1
  • Date: September 2021

Features and Improvements:

Read Also: How to quickly check traffic on your way to work or home using Google Maps
  1. Improved system stability and performance
  2. New security patches for enhanced device security
  3. Enhancements to the user interface for a more intuitive experience
  4. Improved battery optimization for extended usage
  5. Bug fixes for reported issues and glitches

If you haven’t updated your Samsung Galaxy Tab A 10.1 (2019) to the latest software version, it is recommended to do so. Here’s how:

  1. Connect your tablet to a stable Wi-Fi network
  2. Go to Settings
  3. Scroll down and tap on Software Update
  4. Select Download and Install
  5. Wait for the update to be downloaded and installed
  6. Restart your tablet to complete the update process

Note: It is advisable to back up your important data before performing any software updates to avoid any potential data loss.

By keeping your Samsung Galaxy Tab A 10.1 (2019) up to date, you can ensure a smoother, more secure, and optimal user experience. Remember to regularly check for new software updates to stay up to date with the latest features and improvements provided by Samsung.

FAQ:

My Galaxy Tab A 10.1 won’t turn on, what should I do?

If your Galaxy Tab A 10.1 won’t turn on, first try charging it using a different charger and cable to make sure it’s not a problem with the charging accessories. If that doesn’t work, try performing a forced restart by holding down the power button and volume down button simultaneously for about 10 seconds. If the tablet still won’t turn on, you may need to contact Samsung customer support or visit a service center for further assistance.

Why won’t my Galaxy Tab A 10.1 power on even after charging it?

If your Galaxy Tab A 10.1 doesn’t power on after charging it, it’s possible that the battery is completely drained or there may be a hardware issue. Try connecting it to a different power source or using a different charger and cable to rule out any charging-related problems. If the tablet still won’t power on, you may need to have it inspected by a professional or contact Samsung customer support for further assistance.

What can I do if my Galaxy Tab A 10.1 is stuck on the Samsung logo and won’t turn on?

If your Galaxy Tab A 10.1 is stuck on the Samsung logo and won’t turn on, first try performing a forced restart by holding down the power button and volume down button simultaneously for about 10 seconds. If that doesn’t work, you can try wiping the cache partition or performing a factory reset using the recovery mode. However, be aware that a factory reset will erase all data on your tablet, so make sure to back up your important files before proceeding.

Is there a way to fix a Galaxy Tab A 10.1 that won’t turn on without losing my data?

If your Galaxy Tab A 10.1 won’t turn on and you don’t want to lose your data, you can try connecting it to a computer using a USB cable and see if it’s recognized. If it is, you may be able to access your files and back them up before attempting any troubleshooting steps. If the tablet is not recognized by the computer, it may be necessary to seek professional help or contact Samsung customer support for further assistance.

My Galaxy Tab A 10.1 was working fine, but now it won’t power on. What should I do?

If your Galaxy Tab A 10.1 was working fine before, but now it won’t power on, there are a few things you can try. First, make sure the battery is not completely drained by connecting it to a power source and letting it charge for at least 15 minutes. If that doesn’t work, try performing a forced restart by holding down the power button and volume down button simultaneously for about 10 seconds. If the tablet still doesn’t power on, it may be necessary to contact Samsung customer support or visit a service center for further assistance.

See Also:

    comments powered by Disqus

    You May Also Like