Fix MMC Read Failed Error on Samsung Galaxy S8+ After Software Update - Solutions

Solved Samsung Galaxy S8+ MMC Read Failed Error After Software Update

If you own a Samsung Galaxy S8+ and recently updated its software, you might have encountered the “MMC Read Failed” error. This error typically occurs when the device is unable to read the MultiMediaCard (MMC) storage, causing issues with data access and overall device performance. While it can be frustrating, there are several solutions available to fix this error and restore your Galaxy S8+ to its normal functionality.

Solution 1: Clear Cache Partition

Table Of Contents

One of the simplest solutions to fix the “MMC Read Failed” error is by clearing the cache partition on your Samsung Galaxy S8+. To do this, you need to enter the device’s recovery mode, where you can access various system maintenance options. From there, select the “Wipe Cache Partition” option and wait for the process to complete. Once done, restart your device and check if the error persists.

Solution 2: Perform a Factory Reset

If clearing the cache partition didn’t resolve the issue, you can try performing a factory reset. This process will erase all data and settings on your Galaxy S8+, so make sure to backup your important files beforehand. To perform a factory reset, go to the device’s settings, navigate to “Backup and Reset,” and select the “Factory Data Reset” option. Follow the on-screen instructions to complete the reset, and then check if the error message still appears.

Solution 3: Update Firmware

In some cases, the “MMC Read Failed” error can be caused by outdated firmware. Samsung regularly releases software updates to address various bugs and issues, including storage-related problems. To update your device’s firmware, go to the settings, select “Software Update,” and choose the “Download updates manually” option. If an update is available, proceed with the installation, and restart your device afterwards to apply the changes.

Solution 4: Contact Samsung Support

If none of the above solutions work, it is advisable to contact Samsung support for further assistance. They can provide specific troubleshooting steps or recommend professional service if necessary. Make sure to provide them with detailed information about the error you are experiencing, as well as any steps you have already taken to try and resolve the issue.

By following these solutions, you should be able to fix the “MMC Read Failed” error on your Samsung Galaxy S8+ after a software update. Remember to always backup your important data before attempting any troubleshooting steps that may involve data loss. If the problem persists or worsens, seek professional help to ensure the proper functioning of your device.

Read Also: Top 5 Amazon Fire Stick Alternatives of 2023

Fix MMC Read Failed Error on Samsung Galaxy S8+ After Software Update

If you are experiencing an MMC Read Failed Error on your Samsung Galaxy S8+ after a software update, don’t worry. This error can be resolved with a few simple troubleshooting steps.

Method 1: Clear Cache Partition

Turn off your Samsung Galaxy S8+.
Press and hold the Volume Up button, Bixby button, and Power button simultaneously.
Release all buttons when the Samsung logo appears on the screen.
After the Android Recovery menu appears, use the Volume Down button to navigate to the “Wipe cache partition” option.
Press the Power button to select the option.
Wait for the process to complete, and then select the “Reboot system now” option.

Method 2: Perform a Factory Reset

If the MMC Read Failed Error persists after clearing the cache partition, performing a factory reset may solve the issue. However, note that this will erase all data on your Samsung Galaxy S8+, so it is advisable to back up your data before proceeding. To perform a factory reset:

Go to the Settings menu.
Scroll down and select “Backup and Reset”.
Select “Factory Data Reset”.
Read the disclaimer and then select “Reset Phone” or “Delete All”.
Enter your device’s PIN or password, if prompted.
Select “Erase Everything”.

Method 3: Contact Samsung Support

If the MMC Read Failed Error still persists after trying the above methods, it is recommended to contact Samsung support or visit a Samsung service center for further assistance. They will be able to diagnose the issue and provide a solution.

By following these troubleshooting steps, you should be able to fix the MMC Read Failed Error on your Samsung Galaxy S8+ after a software update.

Read Also: Step-by-Step Guide: How to Download Twitch VOD Videos

Solutions for MMC Read Failed Error

If you are experiencing the MMC Read Failed Error on your Samsung Galaxy S8+ after a software update, here are some solutions that can help fix the issue:

Restart Your Device: Sometimes a simple restart can resolve minor software glitches. Try turning off your device, waiting for a few seconds, and then turning it back on.
Clear Cache Partitions: Clearing the cache partitions can help remove any corrupted temporary files that may be causing the MMC Read Failed Error. To do this, follow these steps:
1. Turn off your Galaxy S8+.
2. Press and hold the Volume Up, Bixby, and Power buttons simultaneously.
3. Release the buttons when the Samsung logo appears.
4. Use the Volume Down button to navigate to the “Wipe Cache Partition” option.
5. Press the Power button to select the option.
6. Wait for the process to complete, then select the “Reboot System Now” option.
Factory Reset: Performing a factory reset will erase all data on your device, so make sure to back up your important files before proceeding. To perform a factory reset, follow these steps:
1. Go to the Settings menu on your Galaxy S8+.
2. Scroll down and tap on “General Management”.
3. Select “Reset” and then tap on “Factory Data Reset”.
4. Tap on “Reset” and enter your device’s PIN or password.
5. Finally, tap on “Delete All” to initiate the factory reset.
Update Firmware: Make sure to install the latest software updates for your device. Software updates often include bug fixes and improvements that can resolve issues like the MMC Read Failed Error.
Contact Samsung Support: If none of the above solutions work, it is recommended to reach out to Samsung Support for further assistance. They may be able to provide specific troubleshooting steps or recommend a repair if necessary.

By following these solutions, you should be able to resolve the MMC Read Failed Error on your Samsung Galaxy S8+ after a software update.

How to Resolve MMC Read Failed Error on Samsung Galaxy S8+

If you are experiencing the “MMC Read Failed” error on your Samsung Galaxy S8+, here are some solutions that you can try to resolve the issue:

Restart your device: Start by restarting your Samsung Galaxy S8+ to see if the error goes away. This simple step can often fix temporary software glitches that may be causing the problem.
Clear cache partition: Clearing the cache partition can help resolve various software-related issues. To do this, follow these steps:
1. Turn off your Samsung Galaxy S8+.
2. Press and hold the Volume Up, Bixby, and Power buttons simultaneously.
3. Release all buttons when the Android logo appears on the screen.
4. Use the Volume Down button to navigate to the “Wipe cache partition” option, and press the Power button to select it.
5. Wait for the process to complete, then select “Reboot system now” and press the Power button to restart your device.
Update or reinstall software: Make sure that your Samsung Galaxy S8+ is running the latest software version. Go to Settings > Software update and check for any available updates. If an update is available, download and install it. If the error persists, you can also try reinstalling the software using Samsung Smart Switch or by visiting a Samsung service center.
Factory reset: Performing a factory reset should only be considered as a last resort, as it will erase all data on your device. However, if none of the above solutions work, a factory reset may be necessary to resolve the MMC Read Failed error. Before proceeding, make sure to backup your important data. To perform a factory reset, go to Settings > General Management > Reset > Factory data reset.

If none of the above solutions work, it is recommended to contact Samsung support or visit a Samsung service center for further assistance. They will be able to diagnose and fix any hardware-related issues that may be causing the MMC Read Failed error on your Samsung Galaxy S8+.

FAQ:

What is MMC read failed error on Samsung Galaxy S8+?

MMC read failed error on Samsung Galaxy S8+ is an error message that appears when the device fails to read the MultiMedia Card (MMC) storage. It can occur after a software update or due to hardware issues.

How can I fix the MMC read failed error on Samsung Galaxy S8+?

There are several solutions to fix the MMC read failed error on Samsung Galaxy S8+. You can try clearing the cache partition, formatting the SD card, or performing a factory reset. It is recommended to backup your data before attempting any of these solutions.

What should I do if the MMC read failed error persists after trying the solutions?

If the MMC read failed error persists after trying the solutions mentioned in the article, it is advisable to contact Samsung support or visit a certified service center. They will be able to diagnose and fix any potential hardware issues that may be causing the error.

Is there a way to prevent the MMC read failed error on Samsung Galaxy S8+?

While there is no foolproof way to prevent the MMC read failed error on Samsung Galaxy S8+, you can minimize the chances of encountering it by keeping your device and SD card in good condition. Avoid installing unofficial software or updates, regularly backup your data, and handle the device and SD card with care.