6 Tips to Fix a Nintendo Switch Controller That Won't Charge | New in 2023

How To Fix Nintendo Switch Controller Won’t Charge | New in 2023

If you’re a dedicated gamer, you know how frustrating it can be when your Nintendo Switch controller won’t charge. Whether you’re in the middle of an intense gaming session or just trying to relax and play your favorite game, a dead controller can really put a damper on your gaming experience.

Luckily, there are a few simple tips and tricks that can help you get your Nintendo Switch controller back in action. In this article, we’ll explore six common troubleshooting techniques to fix a controller that won’t charge.

Table Of Contents

1. Check the charging cable and port: The first step in troubleshooting your controller is to ensure that the charging cable and port are in good working condition. Try using a different cable or testing the cable on another device to rule out any issues.

2. Reset the controller: Sometimes, a simple reset can fix the charging issue. To reset your Nintendo Switch controller, press and hold the small sync button located on the back of the controller for a few seconds. Then try charging the controller again.

3. Clean the charging port: Over time, dirt and debris can accumulate in the charging port, preventing the controller from charging properly. Use a small brush or a can of compressed air to gently clean the port and remove any obstructions.

4. Replace the battery: If your controller is still not charging after trying the previous tips, it’s possible that the battery is faulty. Consider replacing the battery with a new one or contacting the manufacturer for assistance.

5. Update the controller: Outdated firmware can sometimes cause charging issues. Check for any available updates for your Nintendo Switch controller and install them if necessary. This can often resolve compatibility issues and improve charging performance.

6. Contact customer support: If none of the above tips work, it may be time to reach out to customer support. They can provide you with further troubleshooting steps or assist you with repairing or replacing the controller if needed.

By following these tips, you can hopefully get your Nintendo Switch controller charging again and get back to enjoying your favorite games without any interruptions. Remember to always take proper care of your controllers and keep them clean to prevent any future charging issues.

Check the Charging Cable

One of the first things to check when your Nintendo Switch controller won’t charge is the charging cable itself. Sometimes, the issue may simply be a faulty cable.

Read Also: How to change your name in Fortnite: detailed instructions

Here are a few steps to help you check the charging cable:

Inspect the cable for any visible signs of damage such as frayed wires or bent connectors. If you notice any damage, it’s likely that the cable is the cause of the charging issue.
Try using a different charging cable, preferably an official Nintendo Switch charging cable. Third-party cables may not provide the necessary power output or may not be compatible with the switch, leading to charging problems.
Ensure that the charging cable is securely plugged into the Nintendo Switch dock or console. Sometimes, a loose connection can prevent the controller from charging properly.

By checking the charging cable and ensuring it is in good condition and properly connected, you can eliminate any cable-related issues that may be causing your Nintendo Switch controller to not charge.

Read Also: How to Fix Samsung Galaxy S7 Edge Replacement Screen Not Working | [Website Name]

Reset the Controller

If your Nintendo Switch controller is not charging, one of the first troubleshooting steps you can take is to reset the controller. This process can help resolve any minor issues that may be causing the charging problem.

Start by disconnecting the controller from the Nintendo Switch console.
Turn off the controller by pressing and holding the power button for a few seconds.
Once the controller is off, locate the small reset button on the back of the controller.
Take a small object, such as a paperclip or pin, and press the reset button for about 3-5 seconds.
Release the reset button and wait for a few seconds.
After the reset, press the power button to turn on the controller again.
Reconnect the controller to the Nintendo Switch console using the appropriate method.
Check if the controller is now charging properly.

If the controller still does not charge after resetting, you may need to try other troubleshooting methods or consider contacting Nintendo support for further assistance.

Clean the Charging Port

If your Nintendo Switch controller is not charging, it is possible that the charging port is dirty or obstructed. Cleaning the charging port can help to remove any accumulated dust or debris that may be preventing proper connection and charging. Here are the steps to clean the charging port:

Power off the Nintendo Switch controller to avoid any electrical hazards.
Inspect the charging port for any visible dirt, dust, or debris.
Use compressed air or a soft brush to gently remove any dirt or debris from the charging port.
Avoid using any sharp or abrasive objects that could damage the charging port.
Check if the charging port is clean and free from any obstructions.
Plug in the charging cable and ensure it is securely connected to the charging port.
Power on the Nintendo Switch controller and check if it is charging properly.

If cleaning the charging port does not fix the issue, there may be a problem with the charging cable or the controller itself. In that case, consider trying a different charging cable or contacting Nintendo support for further assistance.

Replace the Battery

If your Nintendo Switch controller won’t charge even after trying different charging cables and outlets, it’s possible that the battery is no longer holding a charge and needs to be replaced. Here’s how you can replace the battery in your Nintendo Switch controller:

Start by removing the screws on the back of the controller using a screwdriver.
Carefully open the controller by prying it apart with a plastic opening tool or a small flathead screwdriver.
Locate the battery inside the controller. It’s usually a rectangular component with wires attached to it.
Disconnect the wires from the old battery. Take note of how they are connected so you can easily reconnect them later.
Remove the old battery and replace it with a new one. Make sure to choose a battery that is compatible with your Nintendo Switch controller.
Reconnect the wires to the new battery, making sure to connect them in the same way as they were connected to the old battery.
Carefully close the controller and screw it back together.

Once you have replaced the battery, try charging your Nintendo Switch controller again. If the problem was indeed a faulty battery, it should now start charging properly.

FAQ:

Why isn’t my Nintendo Switch controller charging?

There could be several reasons why your Nintendo Switch controller is not charging. It could be due to a faulty charging cable or port, a drained battery, or a software issue. It is recommended to try different charging cables and ports, make sure the controller is properly connected, and perform a hard reset if necessary.

Why is my Nintendo Switch controller not charging even after trying different charging cables?

If your Nintendo Switch controller is not charging even after trying different charging cables, there could be a problem with the controller’s charging port. The charging port may be damaged or obstructed, preventing the connection to the charging cable. In this case, it is recommended to contact Nintendo customer support or take the controller to a professional for repair.

Can I use a third-party charging dock for my Nintendo Switch controller?

While it is possible to use a third-party charging dock for your Nintendo Switch controller, it is important to ensure that the dock is compatible with the controller. Some third-party docks may not provide enough power or may have compatibility issues, which can lead to charging problems. It is recommended to use official Nintendo charging docks or ones that are specifically designed for the Nintendo Switch controller to avoid any potential issues.