2023 Fix: Soundcore Motion+ Won't Turn On [New Methods & Solutions]

How To Fix Soundcore Motion+ Won’t Turn On | NEW in 2023

Are you having trouble with your Soundcore Motion+ speaker not turning on? Don’t worry, you’re not alone. Many users have faced this issue, and luckily, there are several methods and solutions you can try to fix it. In this article, we will explore the troubleshooting steps that can help you resolve this problem.

Firstly, make sure that your Soundcore Motion+ speaker is charged. Connect it to a power source using the provided USB-C cable and let it charge for at least 15-30 minutes. Once charged, try turning it on again. If it still doesn’t turn on, proceed to the next step.

Table Of Contents

Next, check if the power button is stuck or not functioning properly. Sometimes, the button may get jammed or stuck due to dirt or debris. Carefully press the power button multiple times to see if it loosens up. If it doesn’t, you can try cleaning the button area using compressed air or a soft brush. Be gentle while cleaning to avoid any damage.

If the power button is not the issue, you can try performing a hard reset on your Soundcore Motion+ speaker. To do this, hold down the power button and the volume up button simultaneously for about 10-15 seconds. This will force the speaker to restart, and it may resolve any software glitches or conflicts causing the power issue.

If none of the above solutions work, it is recommended to contact Soundcore customer support for further assistance. They will be able to provide you with more specific troubleshooting steps or guide you on how to get the speaker repaired or replaced if necessary.

Remember, these methods are meant to be general troubleshooting steps and may not work in all cases. It’s always a good idea to reach out to customer support for personalized assistance. We hope that these solutions help you in resolving the power issue with your Soundcore Motion+ speaker and that you can continue enjoying your favorite music on the go.

3 Fix: Soundcore Motion+ Won’t Turn On

If your Soundcore Motion+ won’t turn on, there are a few troubleshooting steps you can try to fix the issue. Here are three methods you can attempt:

Check the battery: Make sure the battery of your Soundcore Motion+ is not completely drained. Connect the speaker to a power source using the provided USB-C cable and let it charge for at least 30 minutes. Once the battery has sufficient charge, try turning on the speaker again.
Reset the speaker: If the battery is not the issue, you can try resetting the Soundcore Motion+. To do this, locate the reset button on the back of the speaker (usually near the charging port). Use a small, pointed object, such as a toothpick or pin, to press and hold the reset button for about 10 seconds. After the reset, try turning on the speaker again.
Contact customer support: If the above methods do not work and your Soundcore Motion+ is still not turning on, it may be a hardware issue. In this case, it is recommended to contact Soundcore customer support for further assistance. They may be able to provide additional troubleshooting steps or arrange for a repair or replacement of the speaker if it is still under warranty.

By following these steps, you should be able to troubleshoot and resolve the issue of your Soundcore Motion+ not turning on. Remember to check the battery, perform a reset, and reach out to customer support if necessary.

New Methods & Solutions to Get Your Gadgets Working Again

If your gadget, like the Soundcore Motion+, is not turning on, it can be frustrating. However, there are several methods and solutions you can try to get your gadgets working again. Here are some troubleshooting steps you can follow:

Check the power source: Ensure that your gadget is properly connected to a power source. If it’s battery-powered, make sure it has enough charge or try charging it using a different power cable or adapter.
Reset or restart: Sometimes, a simple reset or restart can solve the issue. Look for a reset button or option in your gadget’s manual and follow the instructions to reset it. If there is no specific reset option, try turning it off and then on again.
Inspect for physical damage: Examine your gadget for any physical damage like cracks, water damage, or loose connections. If you find any issues, contact the manufacturer or a professional technician for further assistance.
Update firmware or software: Check if there are any available firmware or software updates for your gadget. Manufacturers often release updates to fix bugs and improve performance. Visit the manufacturer’s website or use their official software to update your gadget.
Factory reset: If none of the above steps work, you can try a factory reset. However, keep in mind that a factory reset will erase all your data, so make sure to back up any important information before proceeding. Look for instructions on how to perform a factory reset in your gadget’s manual.

If the problem still persists after trying these methods, it may be necessary to contact the manufacturer’s customer support or bring your gadget to a professional repair service. They will be able to diagnose and fix the issue more accurately.

Remember to always follow the manufacturer’s instructions and guidelines when troubleshooting your gadgets. Attempting to repair them on your own without proper knowledge and expertise can cause further damage.

By following these new methods and solutions, you can increase the chances of getting your gadgets, like the Soundcore Motion+, working again and enjoy their features and functionalities to the fullest.

Read Also: How To Fix Discord API Error: Updated Solutions in 2023

Need help with your Soundcore Motion+ speaker? We’ve got you covered!

If you’re experiencing issues with your Soundcore Motion+ speaker, don’t worry! We have some troubleshooting tips and solutions that may help you get it up and running again.

1. Check the power source

Make sure your speaker is properly connected to a power source. Check the power cable and ensure it’s securely plugged into both the speaker and the power outlet. If you’re using a battery, verify that it’s charged or try using a different battery.

Read Also: How to Fix LG G5 Wont Turn On - Easy Troubleshooting Guide

2. Reset the speaker

In some cases, a simple reset can resolve the issue. Locate the reset button on your Soundcore Motion+ speaker (usually on the bottom or back) and press and hold it for about 10 seconds. Release the button and try turning on the speaker again.

3. Update the firmware

Outdated firmware can cause compatibility issues and other problems. Visit the official Soundcore website and check if there are any firmware updates available for your specific model. Follow the instructions to update the firmware on your speaker.

4. Perform a factory reset

If the above steps didn’t work, you can try performing a factory reset on your speaker. This will restore it to its original settings. Refer to the user manual or visit the Soundcore website for instructions on how to perform a factory reset for your specific model.

5. Contact customer support

If you’ve tried all the troubleshooting steps and your Soundcore Motion+ speaker still won’t turn on, it’s recommended to contact Soundcore customer support. They will be able to provide further assistance and guide you through the process of getting your speaker repaired or replaced if necessary.

Note: These troubleshooting tips are general recommendations and may not fix every issue. It’s always a good idea to consult the user manual or reach out to customer support for specific guidance.

We hope these tips help you resolve any issues you’re facing with your Soundcore Motion+ speaker. Enjoy your music again!

FAQ:

Why is my Soundcore Motion+ not turning on?

If your Soundcore Motion+ is not turning on, it could be due to a few reasons. Firstly, check if the battery is fully charged. If not, connect it to a power source and allow it to charge. Another possible reason could be a software issue. Try resetting the device by holding the power button for 10 seconds. If these methods do not work, there might be a hardware issue, and it is recommended to contact customer support for further assistance.

How do I charge my Soundcore Motion+?

To charge your Soundcore Motion+, connect it to a power source using the included USB-C cable. Plug the USB-C end of the cable into the charging port on the speaker and the other end into a USB wall charger or a computer. The LED indicator on the speaker will turn solid red, indicating that it is charging. Once the battery is fully charged, the LED indicator will turn off.

What should I do if my Soundcore Motion+ is not charging?

If your Soundcore Motion+ is not charging, there are a few troubleshooting steps you can try. First, make sure the USB-C cable is securely connected to both the speaker and the power source. Try using a different USB-C cable or a different power source to see if the issue is with the cable or the charger. If the speaker still does not charge, there might be a problem with the charging port or the battery, and it is recommended to contact customer support for further assistance.

How often should I charge my Soundcore Motion+?

The frequency of charging your Soundcore Motion+ depends on your usage. On average, the battery can last for up to 12 hours of playtime. If you use the speaker regularly and often listen to music at high volume, you might need to charge it more frequently. It is generally recommended to charge the speaker when the battery level is low to ensure uninterrupted usage.

Can I use a different charger to charge my Soundcore Motion+?

Yes, you can use a different charger to charge your Soundcore Motion+ as long as it is compatible with the speaker’s charging requirements. The Soundcore Motion+ comes with a USB-C charging port, so any USB-C charger should work. However, it is recommended to use the charger provided with the speaker or a charger from a trusted brand to ensure safe and efficient charging.